Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Session pre-fetching caused this ordering assertion to no longer be
always true. It should have been removed in
795ddfee40
#minor-release
PiperOrigin-RevId: 370880530
1. Clarify intention of getAdGroupIndexForPositionUs and
getAdGroupIndexAfterPositionUs. Both methods are used for very
specific but different purposes and encode the logic of which
ads should be played at which time, so it's helpful to clarify
this in the documentation as well.
2. Change one usage getAdGroupIndexForPositionUs to use the already
existing nextAdGroupIndex. This is also more in line with the
intended usage as clarified in step 1.
3. Update MediaPeriodQueueTest for updateQueuedPeriods to only
look for duration changes in future periods, not in the
current one, because that's not handled MediaPeriodQueue for ads
and the test is just passing by chance now. Also remove wrong
advancePlaying() calls that are already implicitly included in
the preceding enqueueNext() call.
4. Fix a minor bug where post-roll ads are not checked whether they
are played already before using them as the next ad group. Also
added a test covering this case.
#minor-release
PiperOrigin-RevId: 370664131
Release is a life cycle operation that should only be called when
the player is no longer needed. It's linked to the player lifecycle
and thus very different from prepare/stop.
As a result, it should not be in the same command.
Additionally it's not clear if remote players will ever need to call release,
as the player creator is best candidate to release it.
As a result the release operation doesn't have a use case for a command.
A release command can be added later if a need is identified.
PiperOrigin-RevId: 370649214
A subsequent change will make the UI module access
SphericalGLSurfaceView and VideoDecoderGLSurfaceView
using reflection, now we're at the point where we only
need to reflect the constructors.
PiperOrigin-RevId: 369630102
*** Original commit ***
Rollback of e60609e344
*** Original commit ***
Prevent creation of new sessions if the Timeline is empty.
We currently create sessions based on the placeholder window
index. This shouldn't be needed as we now set a non-empty
timeline as soon as the first MediaItem...
***
PiperOrigin-RevId: 369609523
*** Original commit ***
Prevent creation of new sessions if the Timeline is empty.
We currently create sessions based on the placeholder window
index. This shouldn't be needed as we now set a non-empty
timeline as soon as the first MediaItem is added to the playlist.
Once this check is part of the session manager, we can also remove
the equivalent workarounds from the various code integrations.
***
PiperOrigin-RevId: 369452067
We currently create sessions based on the placeholder window
index. This shouldn't be needed as we now set a non-empty
timeline as soon as the first MediaItem is added to the playlist.
Once this check is part of the session manager, we can also remove
the equivalent workarounds from the various code integrations.
PiperOrigin-RevId: 369432853
This change moves the responsibility of creating, configuring and starting the MediaCodec from the MediaCodecRender to the MediaCodecAdapter.Factory.
This move allows ExoPlayer's client to decide how and when codecs are created and/or reused.
To allow the move, this CL replaces MediaCodecRenderer.ConfigureCodec with MediaCodecRenderer.getCodecConfiguration
PiperOrigin-RevId: 369273887
Previously, we had separate MSG_SET_SURFACE and
MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER messages for
setting different types of supported output. Use of these
constants to switch between outputs during use of a player
was confusing because not all video renderers support both
message types.
To switch from VideoDecoderOutputBufferRenderer to a Surface,
it was sufficient just to send MSG_SET_SURFACE, since all
video renderers support this and clear any other output that
might be set. Conversely, to switch in the opposite direction,
just sending a MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER was
not sufficient, because not all video renderers handle this
message to clear any previous output. Hence it was necessary to
explicitly clear a previously set surface using a separate
MSG_SET_SURFACE message. Passing two messages to switch the
output may prevent renderers from implementing the output switch
efficiently.
This change passes all outputs using a single message type, and
requires that all renderers treat unsupported outputs as though
null were passed (i.e., they clear any existing output). There
are some other miscellaneous improvements:
1. Non-surface outputs are now passed to onRenderedFirstFrame.
This fixes a bug in SimpleExoPlayer's onRenderedFirstFrame,
where previously it could not correctly equality check the
output corresponding to the event to its current output in
the VideoDecoderOutputBufferRenderer case.
2. Fix SimpleExoPlayer to report surface size changes for the
VideoDecoderOutputBufferRenderer case. Even though the
surface is rendered to indirectly in this case, we can still
query (and listen to changes to) the surface's size.
PiperOrigin-RevId: 368215850
There is no use case left where we couldn't use a better
alternative (either looping in the player, using the Player
playlist API, or ConcatenatingMediaSource for advanced cases)
PiperOrigin-RevId: 367990981
Prior to this change, there were some unrealistic quirks in
our Robolectric tests. For example, onRenderedFirstFrame would
be called when using FakeVideoRenderer, despite no output to
render the frame to ever being set. This change improves the
realism of these tests. These changes are required for some
improvements being made to how outputs are set on video
renderers.
PiperOrigin-RevId: 367652169
The hacky workaround for APIs 29/30 doesn't work on API 31. Instead,
we can use the onDisplayInfoChanged callback, that is accessible from
API 31.
PiperOrigin-RevId: 364997282
The main user of the Util method is the bandwidth meter to set the
initial network type. If this is the first call to the
NetworkTypeObserver, then we should also allow the first update to
a known network type even if no reset on network type is activated.
The other uses are analytics listeners that check the network type
at certain events. This can just use the lookup method of the
NetworkTypeObserver.
PiperOrigin-RevId: 363670771
- Update the three `HttpDataSource` implementations to use the
Content-Range response header to determine when this is the
case. The Content-Range header is included when the status
code is 416. See [here](https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/416).
- Update `ByteArrayDataSource` to conform to the requirement.
- Update `DataSourceContractTest` to enforce the requirement.
PiperOrigin-RevId: 363642114
- SampleQueue.peek is replaced with SampleQueue.read with
FLAG_PEEK. This also exposes peek functionality through
SampleStream.
- Use of DecoderInputBuffer.isFlagsOnly is replaced with
FLAG_OMIT_SAMPLE_DATA. This flag can be used with or
without FLAG_PEEK, where-as previously the read position
would never be advanced for an isFlagsOnly buffer.
- formatRequired is replaced with FLAG_FORMAT_REQUIRED.
PiperOrigin-RevId: 363460105
Assert that opening the DataSource at the end of the resource
results in only RESULT_END_OF_INPUT being read.
open() and read() are still permitted to throw, although this
permissiveness will be removed in subsequent commits.
PiperOrigin-RevId: 362905314
Adds a new Listener that extends all other listener.
This is part of the component flattening goal.
After components have been flattened in Player,
and clients transitioned, existing listeners will be deprecated.
PiperOrigin-RevId: 362287507
Add additional assertions to try to figure out why
the tests are flaky when run in the test harness.
Failure could not be reproduced locally even after 4000 run.
PiperOrigin-RevId: 362282251
TransferListener has the contract to have exactly one onTransferEnd per
onTransferStart, so the test can both assert that onTransferInitializing
is called, but not onTransferEnd (even after calling close).
PiperOrigin-RevId: 362262078
It's more flexible to use FakeDataSource, since it allows to testing
different upstream behaviors (e.g., upstream not being able to resolve
the content length).
PiperOrigin-RevId: 362072899
