Live speed adjustment is used for all live playback at the moment,
but has no user visible effect if the media is not played with low
latency. To avoid unnecessary adjustment during playback without
benefit, this change restricts the live speed adjustment to cases
where either the user requested a speed value in the MediaItem or the
media specifically defined a low-latency stream.
Issue: google/ExoPlayer#9329
PiperOrigin-RevId: 421514283
This ensures we test the API level specific logic, in particular
around 5G-NSA detection.
Robolectric has a remaining bug that it doesn't support listening
to service state changes. Hence, we need to ignore some tests on
these API levels still until this is fixed.
PiperOrigin-RevId: 421505951
The media codec renderers have fallback logic in getDecoderInfos
to assume that E-AC3 decoders can handle the 2D version of E-AC3-JOC and
that H264/H265 decoders can handle some base layer of Dolby Vision
content. Both fallbacks are useful if there is no decoder for the
enhanced Dolby formats.
Both fallbacks are not applied during track selection at the moment
because the separate MediaCodecInfo.isCodecSupported method verifies
that the mime type corresponding to format.codecs is the same as the
decoder mime type (which isn't true for the fallback case).
To fix the fallback logic, we can just completely remove this additional
check because it's not needed in the context of this method that is only
called after we already established that the decoder can handle the
format.sampleMimeType.
In addition, we need to map the Dolby Vision profiles to the equivalent
H264/H265 profile to make the codec profile comparison sensible again.
PiperOrigin-RevId: 420959104
* @Override is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs. @CryptoType is a TYPE_USE annotation, so should appear after modifiers and directly before the type.
PiperOrigin-RevId: 418811744
This more closely matches the pattern we have for all implementations
except DefaultMediaSourceFactory (e.g. ProgressiveMediaSource.Factory)
and other factory interfaces like (Http)DataSource.Factory.
PiperOrigin-RevId: 417826803
To support multi-period content we need to store AdPlaybackStates and
SharedMediaPeriod by the periodUid as a key. While after this no-op CL,
we still only support single-period content, storing these resources by
periodUid is the ground work for multi-period support being added in an
follow-up CL.
PiperOrigin-RevId: 416836445
We check the fraction of the available duration we have already
buffered for live streams to see if we can increase the quality.
This fraction compares against the overall available media duration
at the time of the track selection, which by definition can't include
one of the availabe chunks (as this is the one we want to load next).
That means, for example, that for a reasonable live offset of 3 segments
we can at most reach a fraction of 0.66, which is less than our default
threshold of 0.75, meaning we can never switch up.
By subtracting one chunk duration from the available duration, we make
this comparison fair again and allow all live streams (regardless of
live offset) to reach up to 100% buffered data (which is above our
default value of 75%), so that they can increase the quality.
Issue: google/ExoPlayer#9784
PiperOrigin-RevId: 416791033
*** Original commit ***
Rollback of 0aa23b08b1
*** Original commit ***
Add capability flags for hardware and decoder support
Issue: google/ExoPlayer#9565
***
***
PiperOrigin-RevId: 416285603
*** Original commit ***
Make audio track min buffer size configurable.
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
***
PiperOrigin-RevId: 415469179
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 415268938
`DefaultAudioSink` already has 3 telescoping
constructors and an other one would be have been
needed to add a buffer size tuning option.
PiperOrigin-RevId: 414703366
Allowing duplicate groups caused some other code working with the
array to use reference equality comparison. This is error-prone,
easily forgotten (e.g. when using the TrackGroups in a map) and
causes bugs when TrackGroups are serialized to disk or to another
process.
All TrackGroups created by ExoPlayer are already unique and custom
code creating TrackGroupArrays with identical groups can easily
distringuish them by adding an id to each group.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413617005
And also tweak existing role flag logic to strictly prefer perfect
matches over partial matches.
Caveat: Video role flags only supported for fixed track selections
(same issue as Issue: google/ExoPlayer#9519).
Issue: google/ExoPlayer#9402
PiperOrigin-RevId: 412292835
Currently, DrmSessionManager takes player specific values (= the
playback looper) through (pre)acquireSession calls and requires
the caller to pass in the same values every time.
Instead, we can configure the DrmSessionManager for playback with
a player once before it's being used. We can't simply extend the
prepare() method as prepare may be called before the player is
created to prewarm the DrmSessionManager.
The new method also takes a PlayerId which is bound to the lifetime
of the player similar to the playback looper.
To avoid breakage of custom MediaSources with DRM, we can keep the
old the SampleQueue.createWithDrm method as deprecated.
PiperOrigin-RevId: 410998240
Currently, TrackSelectionOverrides are documented as being applied
per track type, meaning that one override for a type disables all
other selections for the same track type. However, the actual
implementation only applies it per track group, relying on the
track selector to never select another renderer of the same type.
This change fixes DefaultTrackSelector to fully adhere to the
TrackSelectionsOverride definition. This solves problems when
overriding tracks for extension renderers (see Issue: google/ExoPlayer#9675)
and also simplifies a workaround added to StyledPlayerView.
#minor-release
PiperOrigin-RevId: 409121711
The asynchronous MediaCodec adapter queues input buffers in a
background thread. If a codec queueuing operation throws an exception,
the buffer enqueuer will store it as a pending exception and re-throw it
the next time the adapter will attempt to queue another input buffer.
The buffer enqueuer's flush() and shutdown() may throw an exception if
the pending error is set. This is subject to a race-condition in which
the pending error can be set while the adapter is flushing/shutting down
the enqueuer, e.g., if an input buffer is still being queued and the
codec throws an exception. As a result, the adapter cannot flush or
shutdown gracefully.
This change makes the buffer enqueuer to ignore any pending error
when flushing/shuttinf down so that the adapter can flush/release
gracefully even if a queueing error was detected.
PiperOrigin-RevId: 409113054
MediaSource can be reused with other Player instances after they
have been released, so we need to set the PlayerId when preparing
the source. Access can mostly be handled by the implementation in
BaseMediaSource.
PiperOrigin-RevId: 408878824
And in a couple of related places.
This is for consistency with the rest of the codebase where
we exclusively use indices.
#minor-release
PiperOrigin-RevId: 408273372
When operating the MediaCodec in asynchronous mode, after a
MediaCodec.flush(), we start MediaCodec in the callback thread,
which might trigger errors in some platforms. This change adds an
experimental flag to move the call to MediaCodec.start() back to the
playback thread.
PiperOrigin-RevId: 407801013
When we have multiple overrides for TrackGroups associated with
one renderer, we need to look at all of them to find the non-empty
one. Empty ones should only be used to remove previously selected
tracks for this group and otherwise be ignored.
Currently this is broken because the first override (no matter if
it's empty or not) is used as the final selection for this renderer.
Issue: google/ExoPlayer#9649
#minor-release
PiperOrigin-RevId: 407792330
Where this introduced an inconsistency (e.g. assigning to something
called `windowIndex`), I generally renamed the transitive closure of
identifiers to maintain consistency (meaning this change is quite
large). The exception is code that interacts with Timeline and Window
directly, where sometimes I kept the 'window' nomenclature.
#minor-release
PiperOrigin-RevId: 407040052
This helps to prevent issues where decoders can't handle negative
timestamps. In particular it avoids issues when the media accidentally
or intentionally starts with small negative timestamps. But it also
helps to prevent other renderer resets at a later point, for example
if a live stream with a large start offset is enqueued in the playlist.
#minor-release
PiperOrigin-RevId: 406786977
The static and dynamic metadata now build up in a list, such that when
the MediaMetadata is built, they are applied in an event order. This
means that newer/fresher values will overwrite older ones. The MediaItem
values are then applied at the end, as they take priority over any other.
#minor-release
PiperOrigin-RevId: 405383177
The current API exposes an `ImmutableMap` of
`TrackGroup` -> `TrackSelectionOverride`.
This has several disadvantages:
- A difficult to use API for mutation
(`ImmutableMap.Builder` doesn't support key removal).
- There is no track selection specific methods,
how the generic map API mapps to the selection override is not complex
but to obvious for a casual reader.
- The internal data type is exposed, making internal refactor difficult.
This was done to have the API ready as quick as possible.
When transitioning the clients to the map API in <unknown commit>,
it became clear that the map API was too verbose and not mapping
to the clients needs, so utility methods
were added to make operations clearer and more concise.
Nevertheless, having to use utility method to use easily and correctly
an API is not the sign of a good API.
This cl refactors the track selection API for several improvements:
- Add a type `TrackSelectionParameters` that encapsulate the internal
data structure (map currently).
- For iteration, expose as a list.
- Add a `Builder` for easy mutable operations.
- Add track selection specific methods to avoid having utilities functions.
- Those operations are the same as `DefaultTrackSelector.Parameters`
for easier migration. (`setOverride` was renamed to `addOverride`)
- Move `TrackSelection` classes outside of `TrackSelectionParameters`
as their own top level classes.
The migration of the client code is straightforward as most of it
were already using the previously mentioned utility functions
that are now native methods.
The full migration has not been done yet, and is pending on this cl approval.
PiperOrigin-RevId: 405362719
Common houses DataSource as an interface for reading data,
but most of the concrete implementations are in ExoPlayer.
This means that in practice, if an app wants to use a module
that reads using DataSource (e.g. extractor), they may be
forced to depend on ExoPlayer as well to get a concrete
implementation (e.g. FileDataSource). This change moves the
DataSource implementations into common to resolve this.
PiperOrigin-RevId: 403222081
An upcoming change will modify ExoPlayer.Builder#build() to return
ExoPlayer, so any places that explicitly need a SimpleExoPlayer
instance should be using SimpleExoPlayer.Builder.
PiperOrigin-RevId: 403028312
Update the UI module, the demos and most other users
to make use of the new player TracksInfo and track
selection override APIs.
PiperOrigin-RevId: 402817857
