`DvbDecoder` which used to be `SimpleSubtitleDecoder` will now be called `DvbParser` and implement `SubtitleParser` interface. There was, however, already a `DvbParser`, used by `DvbDecoder` behind the scenes. Hence, the refactoring only requires the existing `DvbParser` to adhere to the new `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality as `DvbDecoder` provided by `DelegatingSubtitleDecoder` backed-up by a new `DvbParser` instance, available from the `SubtitleDecoderFactory`.
PiperOrigin-RevId: 548155759
`Tx3gDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Tx3gParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Tx3gParser` instance.
PiperOrigin-RevId: 548144492
Before this CL, the text with a scale span would wrap text, with because the scale wasn't taken into account when measuring the width of the overlay.
PiperOrigin-RevId: 548123626
Unlike ExoPlayer, when play/pause is called on MediaController, the playback suppression reason is set to default causing a change in it and subsequent callbacks on the Player.Listener.
PiperOrigin-RevId: 548088931
Add Ogg ID Header and Comment Header Pages to the Ogg encapsulated Opus for offload playback. This further matches the RFC 7845 spec and provides initialization data to decoders.
PiperOrigin-RevId: 548080222
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
SingleInputVideoGraph implements GraphInput now, so the asset loaders would
interface directly with SIVG, rather than VideoSampleExporter. This is to pave
way for multi-asset video processing.
PiperOrigin-RevId: 547561042
The setPlayerCommand and setSessionCommand builder methods contain assertions to ensure that at most one of these fields is set, but this left it possible to create a command button with no command by calling build on an empty builder.
PiperOrigin-RevId: 547488248
This change also marks the buttons of the custom layout as
enabled/disabled according to available commands in the controller.
Accordingly, `CommandButton.Builder.setEnabled(boolean)` is deprecated
because the value is overridden by the library.
Issue: androidx/media#38
#minor-release
PiperOrigin-RevId: 547272588
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
durationUs is almost always going to be a larger number than the sample
rate, so pass as the main value, rather than the multiplier.
PiperOrigin-RevId: 547193927
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
This is needed for several subtitle formats where the `data` passed to
`SubtitleParser` doesn't contain any cue timing, such as PGS, CEA-608,
CEA-708, and DVB.
PiperOrigin-RevId: 547177127
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
We currently only log the input buffers to the codec, but the test
will be more complete and provide more insights into the playback
behavior if we also dump more information about these input buffers
(timestamps and flags) and also all output buffers with their
timestamps and whether they are rendererd (only relevant for video).
And also use the CapturingAudioSink to output the audio data we produce.
PiperOrigin-RevId: 546898937
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
This removes some stack traces in unit tests when a
`RemoveMediaController` was created with `waitForConnection=false`
in which case the missing controller in the
`MediaControllerProviderService` caused a `NullPointerException`.
PiperOrigin-RevId: 546795181
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
