- Deprecate constructors that don't take an executor, to direct
developers toward the new ones. Callers can trivially pass
Runnable::run to one of the new ones if they want old behaviour.
- Add comment explaining warning suppression added in the CL that
added parallelised download support.
Issue: #5978
PiperOrigin-RevId: 318803296
Previously only pcm encoding were stored in Format,
this was an issue as for audio passthrough and offload
lots of code needs to pass complex format informations
(encoding, sample rate, channel count, gapless metadata)
but could not use Format and each function was taking
each as different parameter.
By allowing Format to contain any encoding, and not only
pcmEncoding, it allows to pass a Format everywhere in ExoPlayer
code that needs a Format.
This patch does not have any functional change. It is only an internal refactor.
PiperOrigin-RevId: 318789444
Gapless offload is fixed in later R beta builds of all Pixels supporting R.
On the firsts R beta builds of Pixel 4, run the following command.
`setprop vendor.audio.offload.gapless.enabled true`.
It can not be enabled on the first Pixel 2 and 3 beta build.
PiperOrigin-RevId: 318436134
This it is enabled only on a list of
manually tested devices.
The list is empty in this CL.
*** Reason for rollforward ***
Fixed dependent cl was rolled forward.
*** Original change description ***
Rollback of 962e08d3be
*** Original commit ***
Add Offload gapless support
Confirmed to work on a Pixel 4 after enabling the feature:
`setprop vendor.audio.offload.gapless.enabled true`
***
***
PiperOrigin-RevId: 318433123
*** Reason for rollforward ***
Fixed dependent cl was rolled forward
*** Original change description ***
Rollback of 2aac0717d7
*** Original commit ***
Propagate format in supportsOutput
It is needed to know if gapless is needed,
as gapless offload might not be supported.
***
***
PiperOrigin-RevId: 318429321
*** Reason for rollforward ***
Rollforward after making sure the handler is created,
and that a test is written preventing a
similar regression.
*** Original change description ***
Rollback of b6f5a263f7
*** Original commit ***
Rollforward of commit 5612ac50a332e425dc130c3c13a139b9e6fce9ec.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
PiperOrigin-RevId: 318274400
Ignore two tests in AsynchronousMediaCodecBufferEnqueuerTest
until the ShadowMediaCodec's behavior is updated to apply
input buffer ownership.
PiperOrigin-RevId: 318251859
Numerical lines conceptually map to a grid of lines in the viewport,
with the Cue text lines being aligned to one of the viewport lines.
It doesn't make sense to position a single-line cue differently based
on lineAnchor when it's expected to 'snap' to a particular line on the
viewport grid. So we redefine the position to be in terms of the cue
lines rather than the bounds of the cue box.
It's also not possible to always handle ANCHOR_TYPE_MIDDLE when
lineType=NUMBER (as it relies on the number of lines in the cue being
odd), so it's easier to ignore lineAnchor completely.
PiperOrigin-RevId: 318034664
Postrolls would be skipped because the period duration wasn't know at
the moment of resuming playback after backgrounding, so the position
wouldn't be resolved to resume the postroll ad.
We have the period duration stored in the AdPlaybackState, so we can
use that directly.
Issue: #7518
PiperOrigin-RevId: 317830418
They currently fall back to the main Looper if the current thread
doesn't have a Looper. All the changed Handlers are guaranteed to
be created on a thread with a Looper (mostly the ExoPlayer playback
Looper) and thus can make this stricter assumption. This makes it
easier to reason about the code as there are no ambiguities as to which
thread the Handler is running on.
PiperOrigin-RevId: 317334503
The setForeground mode method blocks in the same way as release
and should use the same timeout if configured.
In case the method runs into the timeout, a player error is reported.
PiperOrigin-RevId: 317283808
*** Original commit ***
Rename Util methods to clarify which Looper is used.
The method name didn't clarify that either the main or current
Looper is used.
***
PiperOrigin-RevId: 317283606
Looks like this change was introduced in
<unknown commit>
onKeysRemoved is currently not triggered in DefaultDrmSessionManager
as far as I can tell. It seems like it should be called from here.
PiperOrigin-RevId: 317072794
*** Original commit ***
Rollforward of commit 5612ac50a332e425dc130c3c13a139b9e6fce9ec.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it...
***
PiperOrigin-RevId: 316914147
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
***
PiperOrigin-RevId: 316898804
Ads can appear due to asynchronous ad tag requests completing after
earlier ads in a pod have loaded, so remove the requirement that the
ad count can't change. The MediaPeriodQueue should handling discarding
buffered content if an ad appears before already buffered content, so
I think this case is actually handled correctly by the core player
already.
Also remove the requirement that an ad URI can't change. This is a
defensive measure for now, but it's likely that a later fix in the IMA
SDK for an issue where loadAd is not called after preloading then
seeking before a preloaded ad plays will result in loadAd being called
more than once, and I think it's possible that the second call to
loadAd may have a different URI. Because the ad URI should only change
after an intermediate seek to another MediaPeriod, there shouldn't be
any problems with buffered data not getting discarded.
Issue: #7477
PiperOrigin-RevId: 316871371
The test was trying to synchronize a background decoding thread by
waiting for pending decode calls. However, the background thread needs
to fully queue the newly available output buffer before we can stop
waiting to ensure it's actually fully predictable. So we change the
pending wait to wait until the input buffer is cleared, which only
happens after the decoder is definitely done with it.
Also properly clean-up decoder (including shutting down the background
thread).
PiperOrigin-RevId: 316870659
This flag isn't needed anymore because the waiting for keys happens on
the source side and the source just returns NOTHING_READ under the
same conditions.
PiperOrigin-RevId: 316704214
We started using this method from other tests unrelated to
TestExoPlayer, so the method is better placed inside a generic Util
class.
PiperOrigin-RevId: 316675067
This change adds MediaSource.getMediaItem and deprecates MediaSource.getTag. For backwards compatibility, the tag is made available through the Window with `mediaItem.playbackProperties.tag` as well as in the deprecated `tag` attribute.
PiperOrigin-RevId: 316539752
Using the default offset as a magic constant makes tests hard to
understand. Improve that by looking up the value from the timeline or
setting it explicitly in multiple places, so the relationship becomes
clear.
PiperOrigin-RevId: 316421977
The correct order of initializing the MediaCodec should be (as per
documentation
https://developer.android.com/reference/android/media/MediaCodec#initialization)
"create -> setCallback -> configure -> start"
but the MediaCodecRenderer currently does
"create -> configure -> setCallback -> start"
MediaCodec implementations did not complain about this so far, but the
wrong sequence does not work with the MediaCodec in block mode (new mode
in Android R) and also the ShadowMediaCodec won't operate in
asynchronous mode otherwise. To initialize the MediaCodec in the correct
order, this commit adds configure() in the MediaCodecAdapter so the
MediaCodecRenderer can do:
adapter.configure(); // sets the callback and then configures the codec
adapter.start(); // starts the codec
PiperOrigin-RevId: 316127680
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
PiperOrigin-RevId: 315948869
*** Original commit ***
Propagate format in supportsOutput
It is needed to know if gapless is needed,
as gapless offload might not be supported.
***
PiperOrigin-RevId: 315947888
*** Original commit ***
Add Offload gapless support
Confirmed to work on a Pixel 4 after enabling the feature:
`setprop vendor.audio.offload.gapless.enabled true`
***
PiperOrigin-RevId: 315946947
The test uses two items with period-in-window offsets and a non-zero default start position. The test also prepares the first item lazily so
that the start position (and thus the renderer offsets) need to change.
This is arguably the most complicated setup that needs to be tested.
PiperOrigin-RevId: 315903958
