All other AndroidX libraries have already increased their min SDK to
21.
This change renames private symbols to remove `V21` suffixes and
similar, but doesn't change public or protected symbols with similar
names, to avoid needless breakages/churn on users of the library.
Some of the dead code removal is more complex, so I've split it out
into follow-up changes to make it easier to review.
PiperOrigin-RevId: 651776556
When testing locally it seemed that upgrading KGP to `1.9.20` resolved
this, but testing again confirms this was incorrect, so the problem
was reintroduced in 00d1e70a34.
This change reverts back to KGP `1.9.0` (since upgrading didn't help)
and instead implements the workaround suggested in
https://issuetracker.google.com/278545487. The workaround is now in
the `lib-common` `build.gradle` file, which is transitively depended
on by all modules (and therefore all apps that use this library), so
there's no need for any developer action, and so the release note is
removed.
Issue: androidx/media#1262
PiperOrigin-RevId: 651066418
As reported in Issue: androidx/media#1493 we already use `HEADSETHOOK` to start
waiting for a double-tap, but we don't consider it for the second tap.
Similarly, we previously considered `PLAY` for the second tap, but not the first.
Only `HEADSETHOOK` and `PLAY_PAUSE` are
[documented](https://developer.android.com/reference/androidx/media3/session/MediaSession#media-key-events-mapping)
to transform double-tap to `seekToNext`. So this change removes the
`PLAY` detection from the second tap.
#cherrypick
PiperOrigin-RevId: 651017522
During a seek, or when playing a media with clipped start,
MCVR encounters preroll decode-only buffers that are not rendered.
Use C.BUFFER_FLAG_NO_OTHER_SAMPLE_DEPENDS_ON_THIS to determine
whether a decode-only buffer is unused as reference.
These buffers can be dropped before the decoder.
When this optimization is triggered, increment
decoderCounters.skippedInputBufferCount.
Tested in ExoPlayer demo app on "One hour frame counter (MP4)"
after enabling extractorsFactory.setMp4ExtractorFlags(
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES);
Observe: "sib" increases on each seek.
PiperOrigin-RevId: 650566216
Changes to FragmentedMp4Extractor to parse additional sample dependency
information and mark output samples as "no other samples depend on this".
Only applies to H.264 tracks.
Controlled by new fMP4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 650538377
Once a service is started as a foreground service, it must
be started into the foreground. This means an app can not
suppress a play command arriving from the `MediaButtonReceiver`
once the receiver has started the service.
This change adds a method to the `MediaButtonReceiver` that
allows app to suppress starting the service to not get into
this situation of wanting to suppress the play command after
the service is already started.
Issue: androidx/media#1528
PiperOrigin-RevId: 650280025
Upon the call of `PreloadMediaSource.preload`, the source will periodically check the source refresh or period loading error, and trigger `PreloadMediaSource.PreloadControl.onPreloadError`. For now, the `DefaultPreloadManager` will skip the problematic source and continue to preload the next source. The checking of the error will be terminated when the source stops preloading or releases.
PiperOrigin-RevId: 650195817
This utility helps apps to forward to another Player while overriding
selected behavior or state values. The advantage to a ForwardingPlayer
is that the SimpleBasePlayer base class keeps ensuring correctness,
listener handling etc.
The default forwarding logic tries to stay as close as possible to the
original method calls, even if not strictly required by the Player
interface (e.g. calling single item addMediaItem instead of
addMediaItems if only one item is added).
Issue: androidx/media#1183
PiperOrigin-RevId: 650155924
The Timeline, Tracks and MediaMetadata are currently provided
with a list of MediaItemData objects, that are a declarative
version of these classes. This works well for cases where
SimpleBasePlayer is used for external systems or custom players
that don't have a Timeline object available already. However,
this makes it really hard to provide the data if the app already
has a Timeline, currently requiring to convert it back and forth
to a list of MediaItemData.
This change adds an override for `State.Builder.setPlaylist`
that allows to set these 3 objects directly without going
through MediaItemData. The conversion only happens when needed
(e.g. when modifying the playlist).
PiperOrigin-RevId: 649667983
The value is basically a duplicate of the information stored
in the timeline field. Reducing the source of truth to the
single Timeline also allows acceptance of other Timelines in the
future that don't necessarily have the helper structure of
the playlist.
To allow apps to retrieve the current playlist as it is, we
add a getter instead.
PiperOrigin-RevId: 649667281
Changes to Mp4Extractor to parse additional sample dependency information
and mark output samples as "no other sample depend on this".
Only applies to H.264 tracks.
Controlled by new mp4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 649640184
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
This is a new `DataSource` that can be used to read from a `FileDescriptor`.
Limitations:
- The provided file descriptor must be seekable via lseek.
- There's no way to duplicate a file descriptor with an independent position (it
would be necessary instead for the app to provide a new FD). Therefore this
implementation will only work if there's one open data source for a given file
descriptor at a time.
PiperOrigin-RevId: 649443584
Deprecate `setInputDefaultBufferSize` and `setRequireRegisteringAllInputFrames`
as the new input stream type replaces these (as far as we know they are always
used together).
This is in preparation for supporting asset loaders signaling that they require
these features, specifically for recording from a surface.
PiperOrigin-RevId: 648686087
This change extends the error replication to a given set of
error codes (not only authentication error), but only
replicates an error if the caller of the service `Callback`
is a legacy controller. It also makes error replication
configurable so that apps can opt-out and report errors
manually instead, or define the error codes for which
replication is enabled.
The change also removes the restriction of `sendError` only
being available for Media3 controllers. Instead, sending an
error to a legacy controller updates the platform playback
state in the same way as sending the error to the media
notification controller.
#cherrypick
PiperOrigin-RevId: 648399237
When handling a playback error that originates from a future item in
the playlist, we added support for jumping to that item first,
ensuring the errors 'happen' for the right 'current item'.
See 79b688ef30.
However, when we add this new position discontinuity to the
playback state, there may already be other position discontinuities
pending from other parts of the code that executed before the
error. As we can't control that in this case (because it's part
of a generic try/catch block), we need to send any pending
updates first before handling the new change.
Issue: androidx/media#1483
#cherrypick
PiperOrigin-RevId: 646968309
Extractors should not report additional tracks once they called
ExtractorOutput.endTracks. This causes thread safety issues in
ProgressiveMediaPeriod where the array of sample queues is
extended while the playback thread accesses the arrays.
Detecting this problem early is beneficial to avoid unexplained
exceptions later one. In most cases where this may happen (namely
TS extractors finding new tracks), it's better to ignore the new
tracks instead of failing completely. So this change adds a
warning log message and assigns a placeholder output.
Note: The same workaround already exists in HlsSampleStreamWrapper
and MediaExtractorCompat.
Issue: androidx/media#1476
#cherrypick
PiperOrigin-RevId: 646427213
Some cases are not handled correctly at the moment:
- Pausing during suppressed playback should not clear the
suppression state.
- Transient focus loss while paused should be reported as
a playback suppression.
Issue: androidx/media#1436
#cherrypick
PiperOrigin-RevId: 644971218
This workaround is only applied on API 34, because the problem isn't
present on API 33 and it is fixed in the platform for API 35 onwards.
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 644729909
Images are rendered into an ImageView (on top of the video shutter).
The image view is set to the images emitted by ExoPlayer's ImageOutput
and cleared when there is no longer a selected image track.
In order to keep the existing behavior of video tracks to only clear
the old output once the new first frame is rendered (avoiding short
periods of black between playlist items), we have to reorder this code
slightly to make it work for video and images. Both are treated in the
same way. If both are enabled, video takes precedence.
As the UI module only depends on the common module, we can't direcly
add the ImageOutput to ExoPlayer. This is done via reflection if
the provided Player is an ExoPlayer.
#cherrypick
PiperOrigin-RevId: 643320666
Determine `nextMediaSequence` and `nextPartIndex` based on the last `SegmentBaseHolder` instance, as it can update `mediaSequence` and `partIndex` depending on whether the HLS playlist has trailing parts or not.
Issue: androidx/media#1395
PiperOrigin-RevId: 642961141
A fatal `PlaybackException` is mapped to a legacy playback state
in state `STATE_ERROR` with error code, message and extras. A
non-fatal error sent to controllers with `MediaSession.sendError`
is synced to the legacy session by setting error code and message
and merging the extras while preserving the rest of the state in
sync with the session player.
Vice versa, a `MediaController` connected to a legacy session receives
fatal errors through `Player.onPlayerErrorChanged()` and non-fatal errors
through `MediaController.Listener.onError()`.
Error codes are mapped in `LegacyConversions`. Values of error codes
in `@SessionError.ErrorCode` come from `@PlaybackExceptino.ErrorCode`
with the exception of `@SessionError.ERROR_IO` and
`@SessionError.ERROR_UNKNOWN`. These already exist in
`@PlaybackException.ErrorCode` and are mapped accordingly to avoid
semantic duplicates.
PiperOrigin-RevId: 642595517
It's currently not possible to remove a previously set image output
on ExoPlayer, although the underlying renderer already supports
receiving null to clear the output. Marking the parameter as
nullable allows apps to clear it as well.
PiperOrigin-RevId: 642569081
useHdr is unused option and doesn't make sense is the dynamic range of the overlay and video must match
Also reorders and adds javadoc in line with coding conventions
PiperOrigin-RevId: 642555396
