For decoder reuse, we want disable() to flush the decoder. However,
if the flush needs to release the decoder for some reason, it seems
non-ideal to immediately re-initialize it. Re-initialization can
also throw ExoPlaybackException, which we don't want for disabling.
This change allows a variant of flush that wont re-initialize the
decoder if it has to be released, which will be used from disable().
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=216834862
reloading frmo snapshots. b/117347850. This is a no-op change as the current
default == _fullboot. When we globally flip and make snapshots the default,
these tests would fail and we are moving them over so that when we flip your
tests still pass.
https://groups.google.com[]forum/#!topic/mobile-ninjas/Y69PTAT5GyY
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=216634430
- Always clip to period duration for the last chunk. We previously
did this only when the last chunk explicitly exceeded the period
end time. We now also do it when the chunk claims to end at the
period boundary, but still contains samples that exceed it.
- If pendingResetPositionUs == chunk.startTimeUs == 0 but the
chunk still contains samples with negative timestamps, we now
clip them by setting the decode only flag. Previously we only
clipped such samples if the first chunk explicitly preceeded the
start of the period.
Issue: #4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215763467
Apps need to set the target compatibility to VERSION_1_8 to enable the
automatic desugaring if they haven't done so already.
Issue:#4907
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215733070
- It's a no-op for now
- Renderers that want to support retaining resources will move
some functionality from their disable() implementations into
reset()
- ExoPlayerImplInternal will be updated to not always call reset()
immediately after disable(), which is what will enable resources
to actually be retained.
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215729783
This makes the following changes to improve consistency among the PlaybackInfo
values:
1. Update buffered position and total buffered duration after loading period
is set as both values are affected by a loading period update.
2. Add copyWithPosition to allow updating the position without resetting the
loading period.
3. Forward the total buffered duration to playing position updates
as it may have changed with the new playing position.
Issue:#4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215712328
When SubtitlePainter positions the cues centred in the given box, it must add
the left offset of the box to get the correct position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215535289
SubtitleView forwards the cue box position to SubtitlePainter. This should be
the position relative to the canvas of the SubtitleView. Currently, however,
we forward the position relative to the parent of SubtitleView. That causes
problems if SubtitleView has a non-zero offset position to its parent.
Issue:#4788
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215535281
This removes the experimental bandwidth meter and uses it as the new default.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215404065
A lot of methods just forward to other methods and there is no conceivable
way a player should implement it another way. Moving these methods to a
base player class allows to remove duplicated code across our player
implementations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215374192
For example, using ExoPlayer.STATE_IDLE falls back to the Player.STATE_IDLE
automatically and thus there is no need to keep the deprecated members.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215363841
If we prepare a deferred media period before the actual timeline is available,
we either prepare with position zero (= the default) or with a non-zero
initial seek position.
So far, the zero (default) position got replaced by the actual default position
(including any potential non-zero window offset) when the timeline became known.
However, a non-zero initial seek position was not corrected by the non-zero
window offset. This is fixed by this change.
Related to that, we always assumed that the deferred media period will the
first period in the actual timeline. This is not true if we prepare with an
offset (either because of an initial seek position or because of a default
window position). So, we also determine the actual first period when the
timeline becomes known.
Issue:#4873
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215213030
These two methods are meant to indicate to the track selection that it's
started or stopped being used. This is helpful to schedule background tasks
related to track selection (e.g. register network change listeners etc.).
This intention is not clearly stated in the method docs.
Also, all track selections of all prebuffered periods stay enabled in
parallel at the moment. As the whole purpose of these methods is to know
whether dynamic updates via updateSelectedTrack may happen, it's better to
only enable track selections of the current loading media period. That's
similar to how we always forward the loading track selections to the
LoadControl.
This change:
1. Improves the JavaDoc of TrackSelection.
2. Disables track selections if loading moves to another period.
3. Reenables track selection if loading moves back to a previous period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215199987
Switch to the recommended way of checking whether the app is running on a TV
device.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215177587
Extend Sony workaround up to and including Oreo.
Due to a platform issue the Display API couldn't report 1080p UI
and 4k SurfaceView support until Oreo. Since Oreo it is still
common for devices to misreport their display sizes via Display,
so this change switches to using system properties up to and
including Pie.
On Pie treble may prevent writing sys.display-size so check for
vendor.display-size instead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214987203
