Segment timelines are technically allowed to be empty, but not all places
add the necessary checks.
Issue: google/ExoPlayer#11014
PiperOrigin-RevId: 514722205
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
#minor-release
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
This change fixes an issue that can be reproduced when
a controller `onConnect` creates a `QueueTimeline` out
of the state of a legacy session and then `prepare` is called.
`activeQueueItemId`, `metadata` and the `queue` of the legacy
session are used when a `QueueTimeline` is created. The change
adds unit tests to cover the different combinatoric cases these
properties being set or unset.
PiperOrigin-RevId: 505731288
ParcelFileDescriptor is quite specific and removing it allows to have
less overloads of startTransformation.
A follow-up CL will undeprecate the overload that takes a MediaItem.
PiperOrigin-RevId: 505670321
When seeking in fMP4, we try to extract as little samples as possible
by only starting at the preceding sync frame. This comparison should
use <= to allow sync frames at exactly the seek position.
Issue: google/ExoPlayer#10941
#minor-release
PiperOrigin-RevId: 505098172
Added onSetMediaItems callback listener to allow the session to modify/set MediaItem list, starting index and position before call to Player.setMediaItem(s).
Added conditional check in MediaSessionStub.setMediaItem methods to only call player.setMediaItem rather than setMediaItems if player does not support COMMAND_CHANGE_MEDIA_ITEMS
PiperOrigin-RevId: 503427927
Starting with API 33 the POST_NOTIFICATION permission needs to be
requested at runtime or the notification is not shown.
Note that with an app with targetSdkVersion < 33
but on a device with API 33 the notification permission is automatically
requested when the app starts for the first time. If the user does not
grant the permission, requesting the permission at runtime result in
an empty array of grant results.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501320632
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
The MediaSourceFactory won't be used by the other AssetLoaders
In order to do that, ExoPlayerAssetLoader has been made public, and the
DefaultAssetLoaderFactory has become a wrapper around
ExoPlayerAssetLoader.
PiperOrigin-RevId: 496386853
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
