During a seek, or when playing a media with clipped start,
MCVR encounters preroll decode-only buffers that are not rendered.
Use C.BUFFER_FLAG_NO_OTHER_SAMPLE_DEPENDS_ON_THIS to determine
whether a decode-only buffer is unused as reference.
These buffers can be dropped before the decoder.
When this optimization is triggered, increment
decoderCounters.skippedInputBufferCount.
Tested in ExoPlayer demo app on "One hour frame counter (MP4)"
after enabling extractorsFactory.setMp4ExtractorFlags(
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES);
Observe: "sib" increases on each seek.
PiperOrigin-RevId: 650566216
Changes to FragmentedMp4Extractor to parse additional sample dependency
information and mark output samples as "no other samples depend on this".
Only applies to H.264 tracks.
Controlled by new fMP4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 650538377
The idea was to not even write any samples to SampleQueues as
they are not needed during the metadata extraction process.
However, this is not easily possible as long as we use our
existing Extractors and MediaSource/Periods for loading given
how deeply ingrained the extraction of samples is in these
classes. For most common formats like MP4, no samples will be
extracted anyway as they can finish the prepare step without
reading any samples.
PiperOrigin-RevId: 650529371
Leb128 is a little-endian long of variable byte length. The format is used during the extraction of the size of the OBU configuration for the iacb configuration box.
PiperOrigin-RevId: 650295002
Once a service is started as a foreground service, it must
be started into the foreground. This means an app can not
suppress a play command arriving from the `MediaButtonReceiver`
once the receiver has started the service.
This change adds a method to the `MediaButtonReceiver` that
allows app to suppress starting the service to not get into
this situation of wanting to suppress the play command after
the service is already started.
Issue: androidx/media#1528
PiperOrigin-RevId: 650280025
We now depend on Kotlin from both `annotation` and
`annotation-experimental`, so it's not really possible to avoid
depending on it from any module now.
PiperOrigin-RevId: 650251094
Upon the call of `PreloadMediaSource.preload`, the source will periodically check the source refresh or period loading error, and trigger `PreloadMediaSource.PreloadControl.onPreloadError`. For now, the `DefaultPreloadManager` will skip the problematic source and continue to preload the next source. The checking of the error will be terminated when the source stops preloading or releases.
PiperOrigin-RevId: 650195817
This utility helps apps to forward to another Player while overriding
selected behavior or state values. The advantage to a ForwardingPlayer
is that the SimpleBasePlayer base class keeps ensuring correctness,
listener handling etc.
The default forwarding logic tries to stay as close as possible to the
original method calls, even if not strictly required by the Player
interface (e.g. calling single item addMediaItem instead of
addMediaItems if only one item is added).
Issue: androidx/media#1183
PiperOrigin-RevId: 650155924
Since the muxer supported only AAC audio codec, the esdsBox was unconditionally created within the audioSampleEntry. This CL refactors the box creation logic by moving it to the codecSpecificBox method. This is to make adding support for new audio codecs easier.
PiperOrigin-RevId: 650130935
The Timeline, Tracks and MediaMetadata are currently provided
with a list of MediaItemData objects, that are a declarative
version of these classes. This works well for cases where
SimpleBasePlayer is used for external systems or custom players
that don't have a Timeline object available already. However,
this makes it really hard to provide the data if the app already
has a Timeline, currently requiring to convert it back and forth
to a list of MediaItemData.
This change adds an override for `State.Builder.setPlaylist`
that allows to set these 3 objects directly without going
through MediaItemData. The conversion only happens when needed
(e.g. when modifying the playlist).
PiperOrigin-RevId: 649667983
The value is basically a duplicate of the information stored
in the timeline field. Reducing the source of truth to the
single Timeline also allows acceptance of other Timelines in the
future that don't necessarily have the helper structure of
the playlist.
To allow apps to retrieve the current playlist as it is, we
add a getter instead.
PiperOrigin-RevId: 649667281
Changes to Mp4Extractor to parse additional sample dependency information
and mark output samples as "no other sample depend on this".
Only applies to H.264 tracks.
Controlled by new mp4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 649640184
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
This is a new `DataSource` that can be used to read from a `FileDescriptor`.
Limitations:
- The provided file descriptor must be seekable via lseek.
- There's no way to duplicate a file descriptor with an independent position (it
would be necessary instead for the app to provide a new FD). Therefore this
implementation will only work if there's one open data source for a given file
descriptor at a time.
PiperOrigin-RevId: 649443584
Parse LHEVCDecoderConfigurationRecord with the ‘lhvC’ type and set the corresponding sample mime type to video/mv-hevc. With no MV-HEVC decoder available, fallback to single-layer HEVC decoding.
PiperOrigin-RevId: 649119173
The default value is 50 seconds.
Changed it to 5 seconds.
This prevents the player from buffering too much data and causing the app to crash due to OOM.
This was reported in https://github.com/androidx/media/issues/1506
PiperOrigin-RevId: 649054885
The VideoSink has an input and an output surface. Clarify which surface
the Javadoc is referring to. Also document that the VideoSink can be fed
with images, and that multiple renderers can feed the same sink.
PiperOrigin-RevId: 649052551
MCVR crashed because MCVR registers a new input stream to VideoSink on every
`onOutputFormatChanged()`, assuming that `onOutputFormatChanged()` is only
invoked on media item transition. However, it can be called multiple times for
one media item.
PiperOrigin-RevId: 649050576
Hardware decoder on some devices fails to write 1920x1080 YUV_420_888 buffers into an ImageReader. This change allows us to remove skipCalculateSsim device workaround in ExportTest.java.
VideoDecodingWrapper now uses media3.MediaExtractorCompat: necessary for parsing of MediaFormat#KEY_CODECS_STRING and decoder capabilities check
PiperOrigin-RevId: 648726721
Lint somehow complains that the integer resulting from the bit-manipulation shouldn't be passed as an @IntDef parameter.
#cherrypick
PiperOrigin-RevId: 648687698
Deprecate `setInputDefaultBufferSize` and `setRequireRegisteringAllInputFrames`
as the new input stream type replaces these (as far as we know they are always
used together).
This is in preparation for supporting asset loaders signaling that they require
these features, specifically for recording from a surface.
PiperOrigin-RevId: 648686087
This is required before we can move CEA-6/708 parsing from the rendering
side of the sample queue to the extraction side.
This re-ordering is needed for video encodings with different decoder
and presentation orders, because the CEA-6/708 data is attached to each
frame and needs to be processed in presentation order instead of decode
order. This change re-orders frames within a group-of-pictures, but also
takes advantage of `maxNumReorderFrames/Pics` values to cap the size of
the re-ordering queue, allowing caption data to be released 'earlier'
than the end of a GoP.
Annex D of the CEA-708 spec (which also applies for CEA-608 embedded in
SEI messages), makes the need to re-order from decode to presentation
order clear.
PiperOrigin-RevId: 648648002
