Even when fixed to the US locale (and thus avoiding surprising behaviour
in e.g. Turkish locale with "i" and "I") there are unexpected behaviours
when upper and lower casing non-ASCII characters.
For example it's sometimes not symmetric, e.g.:
"ẞ".toLowerCase() -> "ß"
"ß".toUpperCase() -> "SS"
In all the ExoPlayer usages we are either dealing with known-ASCII
strings (e.g. MIME types) or comparing against ASCII constant strings
anyway, so it seems easier to just use Guava's ASCII-only class in these
cases.
Util.toUpperInvariant() is null-tolerant, while Ascii.toLowercase() is
not. Most usages in this change are clearly non-null. The BandwidthMeter
usages aren't annotated @Nullable, but the current code *would* work if
countryCode was null in both cases. These methods will now throw NPE if
they're passed null.
PiperOrigin-RevId: 368816287
This is necessary to migrate apps which are using
ExoPlayer.Builder.experimentalSetForegroundModeTimeoutMs
from ExoPlayerImpl to SimpleExoPlayer.
PiperOrigin-RevId: 368657557
Even when fixed to the US locale (and thus avoiding surprising behaviour
in e.g. Turkish locale with "i" and "I") there are unexpected behaviours
when upper and lower casing non-ASCII characters.
For example it's sometimes not symmetric, e.g.:
"ẞ".toLowerCase() -> "ß"
"ß".toUpperCase() -> "SS"
In all the ExoPlayer usages we are either dealing with known-ASCII
strings (e.g. MIME types) or comparing against ASCII constant strings
anyway, so it seems easier to just use Guava's ASCII-only class in these
cases.
This change also includes some null-twiddling, because
Util.toLowerInvariant() is null tolerant, while Ascii.toLowerCase() is
not. Most of the usages were already non-null, and it was easy enough to
change the remaining ones to be so by simple reordering of statements.
I'll make an equivalent change for Util.toUpperInvariant() next.
PiperOrigin-RevId: 368419813
Previously, we had separate MSG_SET_SURFACE and
MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER messages for
setting different types of supported output. Use of these
constants to switch between outputs during use of a player
was confusing because not all video renderers support both
message types.
To switch from VideoDecoderOutputBufferRenderer to a Surface,
it was sufficient just to send MSG_SET_SURFACE, since all
video renderers support this and clear any other output that
might be set. Conversely, to switch in the opposite direction,
just sending a MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER was
not sufficient, because not all video renderers handle this
message to clear any previous output. Hence it was necessary to
explicitly clear a previously set surface using a separate
MSG_SET_SURFACE message. Passing two messages to switch the
output may prevent renderers from implementing the output switch
efficiently.
This change passes all outputs using a single message type, and
requires that all renderers treat unsupported outputs as though
null were passed (i.e., they clear any existing output). There
are some other miscellaneous improvements:
1. Non-surface outputs are now passed to onRenderedFirstFrame.
This fixes a bug in SimpleExoPlayer's onRenderedFirstFrame,
where previously it could not correctly equality check the
output corresponding to the event to its current output in
the VideoDecoderOutputBufferRenderer case.
2. Fix SimpleExoPlayer to report surface size changes for the
VideoDecoderOutputBufferRenderer case. Even though the
surface is rendered to indirectly in this case, we can still
query (and listen to changes to) the surface's size.
PiperOrigin-RevId: 368215850
If this condition isn't true, the player may enter a cycle of discarding
and reloading the same format. As minDurationToRetainAfterDiscard is a
parameter likely left at its default, and minDurationForQualityIncrease
is likely adjusted more often, we correct the value in the problematic
case and log a warning instead of asserting it outright to prevent
unnecessary app breakages.
Issue: #8807
PiperOrigin-RevId: 368207417
There is no use case left where we couldn't use a better
alternative (either looping in the player, using the Player
playlist API, or ConcatenatingMediaSource for advanced cases)
PiperOrigin-RevId: 367990981
Prior to this change, there were some unrealistic quirks in
our Robolectric tests. For example, onRenderedFirstFrame would
be called when using FakeVideoRenderer, despite no output to
render the frame to ever being set. This change improves the
realism of these tests. These changes are required for some
improvements being made to how outputs are set on video
renderers.
PiperOrigin-RevId: 367652169
This was added in 9609af3c23 as part of a LSC.
The RequiresNonNull annotation doesn't work anymore (it doesn't
recognize the outer class member and instead tries to find
the same variable on the inner class). So instead of suppressing
the warning of the non-fulfilled precondition, we can just
check the non-nullness directly and remove the precondition.
PiperOrigin-RevId: 367593941
The main change here is that VideoDecoderGLSurfaceView now implements
VideoDecoderOutputBufferRenderer directly. This avoids SimpleExoPlayer
having to cast to VideoDecoderGLSurfaceView, which will be necessary
if VideoDecoderGLSurfaceView is moved to the UI module. Instead, the
player can cast directly to VideoDecoderOutputBufferRenderer, which
could be moved to the Common module.
The renderer is also moved to be an inner class, since it's not used
anywhere else and since doing this makes it a little easier to move
things around.
PiperOrigin-RevId: 367398147
We added a source that allows mixed placeholder and non-placeholder
periods, but have no way to denote that in the Timeline because the
placeholder flag only exists on Window level. This causes a bug if
the first item in a concatenation has a window-period offset and the
player can't detect whether it's still a placeholder or not.
Adding this flag to Period allows the player to detect this reliably.
In addition we need to make sure that re-resolving pending positions
only happens for the first placeholder period where the window-offset
can actually change. As all subsequent periods have to start at position
0, so they don't need to be re-resolved (and shouldn't).
PiperOrigin-RevId: 367171518
This reverts
<unknown commit>
Which was a temporary workaround for Issue: #1874
Also add a loop to ensure we process as many metadata items as
applicable in each render() call.
PiperOrigin-RevId: 366965504
LSC: go/checker-lsc
Tested:
Sample tests for this CL passed, but some tests failed during the TGP run. Test failures are believed to be unrelated to this CL
PiperOrigin-RevId: 366804637
The condition is meant to be unblocked whenever the constructor is
left. This should include unchecked exceptions (that may be thrown
due to bugs in the dependent components, or user-inhected factories)
PiperOrigin-RevId: 366235361
The new onPositionDiscontinuity callback contains sufficient information, so
that this former workaround to obtain the position before a seek is no longer
needed.
PiperOrigin-RevId: 365993937
Aims to achieve visibility parity with MediaCodecRenderer#onQueueInputBuffer.
Allows measuring the time when the codec queue the first input buffer in the codec. Which means the Codec has been initialized and is about to start decoding.
It also allows measuring how long it takes for the Codec to render its first frame.
PiperOrigin-RevId: 365906756
If the player is created on a background thread (which is allowed
as the only exception to the access-on-one-thread-only rule), it
may happen that a callback on the main thread tries to access the
player before the constructor even finished. This is dangerous and
can cause exceptions due to uninitialized variables.
To solve this, we can make sure that every player access is blocked
until the constructor finished. Blocking is safe because the
constructor itself is not doing any blocking work or acquiring locks.
The thread verification method is already called on every entry
point to the player, so we can reuse the same method for checking.
PiperOrigin-RevId: 365792949
The extended onPositionDiscontinuity callback can be used to improve some
listener classes:
- Listening to onTimelineChanged to detect discontinuities is no longer needed.
- Listening to onSeekStarted is no longer needed as the start position is part
of the onPositionDiscontinuty callback.
- The exact old position is also useful for media time history logging.
As a side effect, removing onSeekStarted handling from PlaybackStatsListener
fixes Issue: #8675 that was caused by the special EventTime handling for
onSeekStarted.
PiperOrigin-RevId: 365558959
The hacky workaround for APIs 29/30 doesn't work on API 31. Instead,
we can use the onDisplayInfoChanged callback, that is accessible from
API 31.
PiperOrigin-RevId: 364997282
The BasePlayer implementation of add/remove
Listener knows about Components.
As those are removed from the Player
interface, the implementation of those
methods needs to be moved down in Player
implementations.
This commit makes no functional change.
PiperOrigin-RevId: 364985291
Null was an alias for DEFAULT. Remove this for nullness
safety in the API.
The ExoPlayer implementation still checks for null and
replaces it by DEFAULT, so this is ABI compatible.
PiperOrigin-RevId: 364370017
