-----
Context:
* Each sequence is wrapped as a single MediaSource, each being played
by an underlying ExoPlayer.
* Repeat mode is typically implemented in Players as a seek to the next
item in the playlist.
-----
This CL:
Repeat mode is triggered by listening for when the main input player
sees a play when ready change due to the end of the media item.
There is a slight delay at the end of the playback, before it repeats.
Setting repeat mode on the underlying players addresses this, but means
that the players will seek without waiting for the CompositionPlayer,
and as such previewAudioPipeline does not get the correct signals
around blocking/flushing.
PreviewAudioPipeline - The seek position can validly be C.TIME_UNSET,
however preview pipeline did not handle this case.
CompositionPlayer getContentPosition is given (through a lambda) as a
supplier to the State object, which means any comparisons between
previous/new state for this value does not work. In SimpleBasePlayer,
there is logic to use the positionDiscontinuityPositionUs for the
position change (see getPositionInfo called from
updateStateAndInformListeners), however this logic is not considered in
getMediaItemTransitionReason, so a condition needed to be added for
this case.
-----
Tests:
* Dump files clearly show the position and data is repeated.
* Assertions on the reasons for transitions or position
discontinuities.
PiperOrigin-RevId: 653210278
In order for DASH playback to benefit from
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES, the fMP4 extractor flag
must be set. The smallest API change that allows this is to add an
experimental method to BundledChunkExtractor.
Add a dash end-to-end test to verify that video frames are skipped at
decoder input.
PiperOrigin-RevId: 651046676
Add support for MPEG4 codec to enable muxing video encoded with the mp4v-es codec. Use esdsBox method to generate esds box required for Mp4v box.
PiperOrigin-RevId: 651000744
Changes to FragmentedMp4Extractor to parse additional sample dependency
information and mark output samples as "no other samples depend on this".
Only applies to H.264 tracks.
Controlled by new fMP4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 650538377
Changes to Mp4Extractor to parse additional sample dependency information
and mark output samples as "no other sample depend on this".
Only applies to H.264 tracks.
Controlled by new mp4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 649640184
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
This is done by reserving some space for moov box at the start of the file and writing it there if it fits. If it doesn't fit, then it is written at the end of the file.
PiperOrigin-RevId: 643944698
This value is used in a follow-up change to re-order SEI messages
containing CEA-6/708 data from decode order to presentation order.
PiperOrigin-RevId: 643296338
This change introduces a new class in Media3 `MediaExtractorCompat`, designed to be a drop-in replacement for platform `MediaExtractor`. While not all APIs are currently supported, the core functionality for the most common use cases of `MediaExtractor` is now available. Full API compatibility will be achieved in the future.
PiperOrigin-RevId: 643045429
Avoid scaling the lanczos windown function when scaling up.
When scaling up (output > input), we shouldn't scale the window
function or we risk not sampling any of the input pixels.
PiperOrigin-RevId: 641838149
Removes the flakiness of
MediaItemExportTest.getProgress_unknownDuration_returnsConsistentStates
by using a longer input asset, such that ExoPlayer does not determine
the duration of the media.
PiperOrigin-RevId: 640502470
Add SeparableConvolution.configure(inputSize) to allow effect configuration
depending on input dimensions.
Add LanczosResample.scaleToFit method to scale input images to fit inside
given dimensions.
PiperOrigin-RevId: 640498008
fragment_shader_separable_convolution_es2.glsl had optimizations that assumed
all convolution coefficients are positive. Support negative coefficients,
and add tests.
PiperOrigin-RevId: 640104741
Switch from 4-channel RGBA_16F lookup texture to 1-channel R_16F.
Do not use a bitmap when creating the lookup table texture.
Instead, fill the texture directly.
Do not manually convert 32-bit float to 16-bit. Instead, let OpenGL
libraries do this for us.
PiperOrigin-RevId: 639717235
The CMCD data was incorrectly added to the `dataSpec` of the media segment instead of the init segment.
Also relaxed the condition for playbackRate to be C.RATE_UNSET when creating an instance of CmcdData.Factory as there was nothing enforcing this check.
#minor-release
PiperOrigin-RevId: 639046080
Degammaing has been removed in cb4b2ea55c. The goldens for
TransformerHdrTest (previously TransformerSequenceEffectTestWithHdr)
were not regenerated because the test wasn't running due to its name
(fixed in e41a966237).
PiperOrigin-RevId: 638645635
Only sample from input bitmap when the input image has changed.
Introduce GainmapShaderProgram.newImmutableBitmap API that signals
input bitmap changes to GainmapShaderProgram (DefaultShaderProgram).
PiperOrigin-RevId: 637920207
PQ and HLG have different luminance ranges (max 10k nits and max 1k nits resp). In GL, colors work in a normalised 0 to 1 scale, so for PQ content, 1=10k nits and and for HLG content, 1=1k nits.
This cl scales and normalises PQ content appropriately so that all HDR content works in the HLG luminance range. This fixes two things
1. Conversions between HLG and PQ are "fixed" (before the output colors looked too bright or too dark depending on which way you are converting)
2. color-altering effects will be able to work consistently across HLG and PQ content
1 is tested in this cl. 2 will be tested when ultra HDR overlays are implemented, both cases have been manually tested to ensure the output looks correct on a screen.
PiperOrigin-RevId: 636851701
Add composition time offset parameter to TRUN box to
support muxing of videos containing B-frames by FragmentedMp4Muxer.
Update TRUN box version from 0 to 1 in order to manage signed
composition time offset.
PiperOrigin-RevId: 636426397
`Info` header is used for CBR files, but in some cases not **every**
frame in these files is the same size. This change stops using the
single frame after the `Info` frame as the 'template' (and assuming all
subsequent frames are the same size/bitrate), and instead derives the
bitrate from fields in the `Info` header. This works for files which are
'almost' constant bitrate, like the one in Issue: androidx/media#1376 where every
frame is either 1044 or 1045 bytes except the one immediately after the
`Info` frame which is 104 bytes (32kbps), resulting in a wildly
incorrect duration calculation.
PiperOrigin-RevId: 636151605
This shows ExoPlayer currently wrongly reports the duration of this
sample, because it assumes every frame is 32kbps (104 bytes) due to the
`PCUT` frame immediately after the `Info` frame.
A follow-up change will modify `Info` frame handling to resolve this
issue.
This sample was crafted using a hex editor to insert the additional
`PCUT` frame (the pattern of `null` and `x` is taken from the sample
file in Issue: androidx/media#1376, the header is modified to set the channel count
to 1 to match the rest of the file), and then update the frame count
and data size of the `Info` header to match.
Issue: androidx/media#1376
PiperOrigin-RevId: 635772837
Fragment shaders in OpenGL ES shader language aren't guaranteed
to support highp, required to correctly represent pixel coordinates
inside large images (e.g. 1920x1080).
This change moves coordinate mirroring for images out of fragment shader.
Fixes http://Issue: androidx/media#1331
PiperOrigin-RevId: 635732208
If MediaCodec allocates passes an image buffer with a cropped region,
SurfaceTexture.getTransformMatrix will cut off 2 pixels from each dimensions.
The resulting videos will appear a little stretched.
This patch inspects the SurfaceTexture transform matrix, and guesses what the
unscaled transform matrix should be.
Behind experimentalAdjustSurfaceTextureTransformationMatrix flag
PiperOrigin-RevId: 635721267
For each item, AudioGraphInput now pads the input audio track with silence
to the duration given in onMediaItemChanged.
Possibly resolves Issue: androidx/media#921 .
PiperOrigin-RevId: 634753721
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 633537106
AudioGraphInput now accepts a range of inputs, as long as the effects
provided modify the audio to be int 16.
As part of this, add the workaround to DefaultCodec to ensure pcm
encoding is correct, and remove parameterized tests that are not valid.
PiperOrigin-RevId: 631404152
