This CL also fixes EOS handling to account for not-yet-copied samples in
`remainingInputToCopyFrameCount`, which would throw off the final output
sample count calculation.
For testing, we allow a tolerance of 0.000017% drift between expected
and actual number of output samples. The value was obtained from running
100 iterations of `timeStretching_returnsExpectedNumberOfSamples()` and
calculating the average delta percentage between expected and actual
number of output samples. Roughly, this means a tolerance of 40 samples
on a 90 min mono stream @48KHz.
PiperOrigin-RevId: 683133461
To avoid rounding errors, set the `Rounding mode` of the `uvFromVu` and `vuFromUs` results to `HALF_UP`. This `Rounding mode` rounds numbers towards the "nearest neighbor" unless both neighbors are equidistant, in which case round up.
PiperOrigin-RevId: 679003943
This CL adds `SonicTest` and `RandomParameterizedSonicTest` as
initial basic unit testing for `Sonic.java`. The tested scenarios
do not necessarily verify a correct implementation of Sonic, but rather
hope to catch any behaviour change from the current implementation.
The change includes a small fix for a lossy simplification and also
checks whether the output sample count matches the expected drift from
the truncation accumulation error present in Sonic's resampler. This is
important as pre-work for fixing issues with unexpected durations within
`SonicAudioProcessor` and `SpeedChangingAudioProcessor` that cause AV
sync issues for speed changing effects.
This is a partial roll forward of e88d6fe459, which was rolled back in
873d485056.
PiperOrigin-RevId: 677756854
Last buffer was not flipped, so was writing the garbage data between
limit and capacity, rather than the actual data between position and
limit.
As a result, all PCM audio dump files need updating.
PiperOrigin-RevId: 676452990
- Added logic to parse media duration from the `mdhd` box for accurate frame rate calculation.
- Fallbacks to track duration from `tkhd` when `mdhd` contains invalid or missing data.
- Avoids incorrect frame rate calculations in MP4 files with an edit list (`elst`) box.
- Adds frame rate calculations for partially fragmented MP4 files.
- Verified accuracy with tools like `mediainfo` and `ffprobe`.
Issue: androidx/media#1531
**Note**: The slight difference in frame rate values in dump files that aren’t MP4s with an edit list or fragmented MP4s isn’t due to differences in `tkhd` and `mdhd` duration values (which should be identical for non-edited or non-fragmented files). Rather, it’s because they are calculated using different timescales. The `mvhd` box defines a global movie timescale, which is used for the track's `tkhd` duration. Meanwhile, each track’s `mdhd` box defines its own timescale specific to its content type, which we now use for more accurate frame rate calculation.
PiperOrigin-RevId: 676046744
to
LAST_SAMPLE_DURATION_BEHAVIOR_SET_FROM_END_OF_STREAM_BUFFER_OR_DUPLICATE_PREVIOUS
This CL also combines LAST_SAMPLE_DURATION_BEHAVIOR_SET_FROM_END_OF_STREAM_BUFFER
and LAST_SAMPLE_DURATION_BEHAVIOR_DUPLICATE_PREVIOUS.
The reason for combining the two enums is that, when the option
to use END_OF_STREAM_BUFFER is selected and if the EOS buffer is
not provided then the muxer anyways fallbacks to duplicate
duration behavior.
The last sample with 0 durations seems less useful so
change the default behavior to non-zero duration.
This will also match the behavior with MediaMuxer.
PiperOrigin-RevId: 675189932
To support for 3gpp h263 codec in Mp4Muxer currently profile and level is hardcoded and provided to h263 box. Parse profile and level from MediaFormat and use those value to write h263 box.
PiperOrigin-RevId: 675004590
The tests were flaky because CompositionPlayer registers audio sequences'
formats to the audio pipeline in first-come-first-serve order. With the change
in bc8d82355f, the audio format is deterministic.
The test is turned off in 060356ea00
PiperOrigin-RevId: 674261801
Sonic would accumulate truncation errors on float to int conversions
that caused the final output sample count to drift noticeably, by
hundreds of samples on streams of a few minutes of length. The fix now
keeps track of the truncation error and compensates for it.
Other small fixes include eliminating lossy operations (e.g. int
division) and using doubles instead of floats for resampling where
helpful.
This CL also introduces `SonicParameterizedTest`, which helps test
resampling on an arbitrary number of randomly generated parameters,
with random sample data. `SonicParameterizedTest` uses `BigDecimal`s
for calculating sample count values, as to avoid precision issues with
large sample counts.
PiperOrigin-RevId: 673852768
When processing edit lists in MP4 files, the media start position may be a non-keyframe. To ensure proper playback, the decoder must preroll to the preceding keyframe, as these preroll samples are essential for decoding but are not rendered.
Issue: google/ExoPlayer#1659
#cherrypick
PiperOrigin-RevId: 673457615
In the current implementation due to missing "="
operator, last three bytes were not checked for
000 or 001 sequence.
In sample_no_bframes file, few samples has extra 0 at the end.
It was working fine with the bug because muxer was writing some
harmless 0 at the end.
PiperOrigin-RevId: 672994054
Limit input image size in Transformer to be less than 4096x4096.
For very large images, this can reduce memory usage substantially,
and stays away from `GL_MAX_TEXTURE_SIZE` - often 4096
PiperOrigin-RevId: 670555939
The `bear-cbr-no-seek-table-trailing-garbage.mp3` test file was generated by appending 150kB of `0xDEADBEEF` onto the end of `bear-cbr-variable-frame-size-no-seek-table.mp3`.
Issue: androidx/media#1563
#cherrypick
PiperOrigin-RevId: 670131828
DASH periods don't have to start at the beginning of a segment. In
these cases, they should report an initial discontinuity to let the
player know it needs to expect preroll data (e.g. to flush renderers)
This information is only available in the ChunkSampleStream after
loading the initialization data, so we need to check the sample
streams and tell them to only report discontinuities at the very
beginning of playback. All other position resets are triggered by
the player itself and don't need this method.
Issue: androidx/media#1440
PiperOrigin-RevId: 668831563
* new ByteBufferGlEffect GlEffect that enables API users to
implement an effect that accesses video frame data via CPU-mapped ByteBuffer
* ByteBufferConcurrentEffect responsible for reading
video frame data in CPU-accessible ByteBuffer
PiperOrigin-RevId: 666375594
Implement a QueuingGlShaderProgram which queues up OpenGL frames and allows
asynchronous execution of effects that operate on video frames without a
performance penalty.
PiperOrigin-RevId: 666326611
This allows seek operations in files that were previously unseekable, particularly those with variable bitrate (VBR) or constant bitrate (CBR) with silence frames.
New samples for tests were created by adding silence frames to existing narrowband and wideband versions.
PiperOrigin-RevId: 665349241
The CL adds another way of writing editable video
tracks where the samples will be interleaved with the
primary track samples in the "mdat" box.
PiperOrigin-RevId: 665313751
The audio mixing is not deterministic on real device testing because of
threading, but runs deterministically on robolectric tests
PiperOrigin-RevId: 662925912
Use ExoPlayer dynamic scheduling to reduce the render() interval for
older API devices where `DefaultCodec.getMaxPendingFrameCount()` is set
to 1 in order to prevent frame drops.
Controlled via API on DefaultDecoderFactory.
Add TransformerForegroundSpeedTest that mimics transcoding while the app
is in foreground.
PiperOrigin-RevId: 662925764
AMR samples with identical data but different names, previously used to generate uniquely named dump files, have been deleted. Instead, `AssertionConfig` is now used to set the dump file prefix, ensuring files are generated with unique names.
PiperOrigin-RevId: 662883541
Constant bit rate (CBR) seeking can be enabled even when the length of the file is not known.
Additionally, dump files for these files have been updated to accurately log the `position` when `timeUs` is set to `0`.
PiperOrigin-RevId: 662868607
There are two ways to write editable tracks samples.
1. In the embedded edit data MP4.
2. Interleaved with primary tracks samples.
Initial plan was to support only option 1 but then the
decision is to support both ways. To identify between these two
an additional key will be required.
Option 2 is yet to be implemented in Mp4Muxer.
PiperOrigin-RevId: 658791214
This is needed to correctly handle files with trailing non-MP3 data
(which is indicated by the length in the `Info` frame being shorter than
the overall length of the file).
The test file was generated by appending 150kB of `DEADBEEF` onto the
end of `test-cbr-info-header.mp3`, and the test asserts that the
extracted samples are identical.
Issue: androidx/media#1480
#cherrypick
PiperOrigin-RevId: 658727595
Add parameterized test for codecs supported by InAppMuxer.
Split TransformerWithInAppMuxerEndToEndParameterizedTest tests
between parameterized and non parameterized
This will be helpful for adding more tests which need not to
be parameterized.
PiperOrigin-RevId: 658353532
Build upon Transformer.videoFrameProcessorFactory in MultipleInputVideoGraph
Check that Transformer.videoFrameProcessorFactory is DefaultVideoFrameProcessor
for multi-input video
Fixes https://github.com/androidx/media/issues/1509
PiperOrigin-RevId: 655232381
