isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit e4f0b73aa325d096b493bd646c63bc6a4bf5880b)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit 6e0f1f10b3666e6c2c74fc5a154dec3f0e03fecb)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit e9364b0f6e1a104de9cf4393daab521edc4eccf4)
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
(cherry picked from commit 9d059352cff0a75f0f9c4e37010bbfa2fc6079fd)
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
(cherry picked from commit 3a66c28d4f0fc6bbd7af3f5846a5645aa3ccf778)
Fix some other link titles and destinations spotted along the way.
#minor-release
PiperOrigin-RevId: 493276172
(cherry picked from commit c006575d4306f9bfad9c6f27d964fab00a6e1718)
The callback is currently triggered on the ExoPlayer playback thread
instead of the app thread that added the listener.
PiperOrigin-RevId: 492474405
(cherry picked from commit f3fc4fb9735a4b67a3740b3796495017eb5c978c)
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
(cherry picked from commit 2f8cf947c71db6be9459492117fe95b1a8bc7178)
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
(cherry picked from commit 5f6fde4d2a90d78a8d58430c88d7dc12849fe163)
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
(cherry picked from commit 02fa8aa784b518f0ffad5c44da6eec1a94def4ee)
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
(cherry picked from commit e598a17b3628e1179fa4219ca3212407fb3fdeb1)
This helps to denote what type of content or folder the metadata
describes.
PiperOrigin-RevId: 492123690
(cherry picked from commit 1ac72de551a07d37c3b80d96028463244407a5b4)
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
(cherry picked from commit 6c467590d0fdc27dd5afeefe479c3d4414483de5)
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
(cherry picked from commit e219ac21ae604f182769d69f6f590191a92100d0)
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
(cherry picked from commit 4cf877b81428021c4eb2dfa1a743178f280aceb5)
The list of charsets is already hard-coded, and using `Charset` types
ensures they will all be present at run-time, hence we will never
encounter an 'unsupported' charset.
PiperOrigin-RevId: 491324466
(cherry picked from commit 043546a03475356764cf8b754bd0fff87a0c6e1a)
It's clearer if each test method follows the Arrange/Act/Assert pattern
PiperOrigin-RevId: 491299379
(cherry picked from commit bf77290fbe78aa25698c1a7082b2a18cd7f1b06c)
Remove self-links, and remove section that is documenting internal
ordering behaviour of
[`SimpleBasePlayer.getCombinedMediaMetadata`](bb270c62cf/library/common/src/main/java/com/google/android/exoplayer2/SimpleBasePlayer.java (L1770))
rather than anything specifically about this method.
#minor-release
PiperOrigin-RevId: 490923719
(cherry picked from commit ed8c196e2eb36eefef9952d255cb6355807b9e9f)
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
(cherry picked from commit 7d62943bcd149eecce77cb44e4f867128ca374d3)
Format expects the values of `averageBitrate` and `peakBitrate` in bps and the value fetched from AC3SpecificBox and EC3SpecificBox is in kbps.
PiperOrigin-RevId: 490756581
(cherry picked from commit 67955e0ce331481bcb3fd94c9ffb9632f27eae6e)
To avoid complicated bit shifting and masking. Also makes the code more readable.
PiperOrigin-RevId: 490749482
(cherry picked from commit 89e4b8d049507efeb610f437429f25cf18df8f8b)
*** Original commit ***
Rollback of 01eddb34f5
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
***
PiperOrigin-RevId: 490707234
(cherry picked from commit 8c91a31ced401ce14911fbfdf58dda3c7ee8e643)
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
PiperOrigin-RevId: 490570517
(cherry picked from commit ea3552c1a030d8b14c0cd0093f7eaa6242f969eb)
This change includes a change in the `IMediaController.aidl` file and needs
to provide backwards compatibility for when a client connects that is of an older or
newer version of the current service implementation.
This CL proposes to create a new AIDL method `onPlayerInfoChangedWithExtensions`
that is easier to extend in the future because it does use an `Bundle` rather than
primitives. A `Bundle` can be changed in a backward/forwards compatible way
in case we need further changes.
The compatibility handling is provided in `MediaSessionStub` and `MediaControllerStub`. The approach is not based on specific AIDL/Binder features but implemented fully in application code.
Issue: androidx/media#102
#minor-release
PiperOrigin-RevId: 490483068
(cherry picked from commit f262e9132b32ad89f65853086f30389925b61422)
ExoPlayer is unable to detect the presence of subtitle tracks in some
MPEG-TS files that don't fully declare them. It's possible for a
developer to provide the list instead, but doing so is quite awkward
without this helper method. This is consistent for how
`DefaultExtractorsFactory` allows other aspects of the delegate
`Extractor` implementations to be customised.
* Issue: google/ExoPlayer#10175
* Issue: google/ExoPlayer#10505
#minor-release
PiperOrigin-RevId: 490214619
(cherry picked from commit 4853444f0dc90163c257d0e20962604510557df4)
This adds the full Builders and State representation needed to
implement all Player getter methods and listener invocations.
PiperOrigin-RevId: 489503319
(cherry picked from commit b81cd08271cd94f244ca5d7c995cd29523057a60)
When estimating the AudioTrack min buffer size, we must use a PCM
frame of 1 when doing direct playback (passthrough). The code was
passing -1 (C.LENGTH_UNSET).
PiperOrigin-RevId: 489238392
(cherry picked from commit d9d716869b7df2cd95704e9ac24a5f9a376afa2c)
They are called from the system only and don't need to be exported
to be visible to other apps.
PiperOrigin-RevId: 489210264
(cherry picked from commit c1fd03df7403019143f503bbe208d73cabc11243)
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
(cherry picked from commit 79b809b5563260cd20541afe607e36ae351fbbed)
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
(cherry picked from commit 1eb8a6b36ed98bd66a5bad5273526a918511a39f)
This tag is only understood by Dackka, which is used to generate the media3 javadoc.
PiperOrigin-RevId: 489233200
(cherry picked from commit 058cba95d40db83c77f4dd0aa8cb561221463b3a)
This better matches the callback name (onSurfaceSizeChanged) and
probably cause less confusion with getVideoSize.
PiperOrigin-RevId: 488669786
(cherry picked from commit 8438daca1f8cbea24aa414ee500044baf1a28367)
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
(cherry picked from commit 1b24e6fd14774d5c8b3e7b8084b30204581d13ce)
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
(cherry picked from commit 3e5103a3e55e2dc545b4a2442beaa49f307ecfdc)
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
(cherry picked from commit 20151b9930f1b54d7894ec41465a2e85df92462d)
