We currently only document it for the getCurrentMediaItem(), but
the command was always meant to cover all information about the
current media item and the position therein.
To correctly hide information for controllers, we need to filter
the Timeline when bundling the PlayerInfo class if only this
command is available.
PiperOrigin-RevId: 503098124
(cherry picked from commit f15b7525436b45694b5e1971dac922adff48b5ae)
When bundling PlayerInfo, we need to remove information if the
controller is not allowed to access it. This was only partially
done at the moment.
PiperOrigin-RevId: 502852798
(cherry picked from commit 69cfba7c53b563577390e4074fd270f078bf6069)
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
(cherry picked from commit c90ca7ba5fb9e83956e9494a584ae6b0620e3b14)
Initialising the fields as Integer and then getting a String on compute
time is slow. Instead we directly initialise these fields as String.
Improves the time taken in bundling PlayerInfo further to less than
200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
(cherry picked from commit 578f2de48f795ad90aafdad645c62fcdbd686e0a)
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
(cherry picked from commit 790e27d929906a36438af5b42ef62a13e4719045)
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
(cherry picked from commit 0512164fdd570a2047f51be719aae75ebcbf9255)
Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
(cherry picked from commit 7fc2cdbe1bdf9968a1e73a670e5e32454090e1bd)
Added another check in test to make sure we don't add keys to bundle for fields with `null` values.
PiperOrigin-RevId: 496948705
(cherry picked from commit 13c93a3dd693e86e6d5208aff45105000858363f)
Users of this class may run into these assertions when creating the
State and they need to check the source code to understand why
the State is invalid. Adding error messages to all our correctness
assertions helps to understand the root cause more easily.
PiperOrigin-RevId: 496875109
(cherry picked from commit 6c98f238e45d19a14041d58f5938f3399da04eb5)
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
(cherry picked from commit 5fa115641d5b45b106844f3e629372417eb100b1)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1954f7e0a334492ffa35cf535d2e6c4e4c9ca91)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 3e7f53fda77048731d22de0221b0520a069eb582)
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
(cherry picked from commit d11e0a35c114225261a8fe472b0b93d4a8a6b727)
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
(cherry picked from commit 545fa5946268908562370c29bd3e3e1598c28453)
This ensures they are not accidentally triggered again when
the state is rebuilt with a buildUpon method.
PiperOrigin-RevId: 495280711
(cherry picked from commit a1231348926b4a88a2a8cb059204c083e304f23f)
This improves the time taken to construct PlayerInfo from bundle from ~600ms to ~450ms.
PiperOrigin-RevId: 495055355
(cherry picked from commit 395cf4debc52c9209377ea85a319d2e27c6533ce)
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit 6e7de583bb42871267899776966575512152b111)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit ab6fc6a08d0908afe59e7cd17fcaefa96acf1816)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit 927b2d6a435a236bb5db7646cf6402557db893f6)
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
(cherry picked from commit ae8000aecaee725dea51a6ded06125884a5b8112)
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
(cherry picked from commit 4895bc42ff656ba77b604d8c7c93cba64733cc7a)
Fix some other link titles and destinations spotted along the way.
#minor-release
PiperOrigin-RevId: 493276172
(cherry picked from commit 636a4a8538ccfb235eeca7d9131d4b5d4d95e9aa)
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
(cherry picked from commit e4fb663b23e38eb6e41b742681bf80b872baad24)
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
(cherry picked from commit f007238745850791f8521e61f6adaf8ed2467c45)
This helps to denote what type of content or folder the metadata
describes.
PiperOrigin-RevId: 492123690
(cherry picked from commit 32fafefae81e0ab6d3769152e584981c1a62fc60)
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
(cherry picked from commit ff7fe222b83c55c93cc9ee1a3763a11473168ece)
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
(cherry picked from commit 568fa1e1fa479fd1659abf1d83d71e01227ab9cf)
Remove self-links, and remove section that is documenting internal
ordering behaviour of
[`SimpleBasePlayer.getCombinedMediaMetadata`](bb270c62cf/library/common/src/main/java/com/google/android/exoplayer2/SimpleBasePlayer.java (L1770))
rather than anything specifically about this method.
#minor-release
PiperOrigin-RevId: 490923719
(cherry picked from commit a6703285d0d1bedd946a8477cb68c46b1a097b09)
This change includes a change in the `IMediaController.aidl` file and needs
to provide backwards compatibility for when a client connects that is of an older or
newer version of the current service implementation.
This CL proposes to create a new AIDL method `onPlayerInfoChangedWithExtensions`
that is easier to extend in the future because it does use an `Bundle` rather than
primitives. A `Bundle` can be changed in a backward/forwards compatible way
in case we need further changes.
The compatibility handling is provided in `MediaSessionStub` and `MediaControllerStub`. The approach is not based on specific AIDL/Binder features but implemented fully in application code.
Issue: androidx/media#102
#minor-release
PiperOrigin-RevId: 490483068
(cherry picked from commit 3d8c52f28d5d3ef04c14868e15036563a9fc662d)
This adds the full Builders and State representation needed to
implement all Player getter methods and listener invocations.
PiperOrigin-RevId: 489503319
(cherry picked from commit 81918d8da7a4e80a08b65ade85ecb37c995934e7)
This better matches the callback name (onSurfaceSizeChanged) and
probably cause less confusion with getVideoSize.
PiperOrigin-RevId: 488669786
(cherry picked from commit 1143edc59ac96ec8524e8203d9445dbb0f006630)
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
(cherry picked from commit 491b13622e79f5c2ef84771b1a29e40f47aca653)
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
PiperOrigin-RevId: 488645089
(cherry picked from commit 1def68bf3c00035aad0821d3997187317ce099dc)
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
(cherry picked from commit 7fcb53da2ddcbe5bc3f66c46ef3574d019712945)
Make it easier to support use of RGBA_101012 rather than RGBA_8888 for EGL
contexts, displays, and surfaces.
This tangentially supports adding HDR tests, by slightly simplifying the color
selection logic we'd have to add in HDR tests.
PiperOrigin-RevId: 482219428
(cherry picked from commit bb215857e5fd0768ce53c7c61ba91c48dab14bd2)
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
(cherry picked from commit f850206c51ced023b1603aa7661dd556ee436740)
