We stop estimating new position when pausing until we
receive a new position from the player. However, this
means that we will continue to return a possible stale
previous position. Updating the current position before
pausing solves this issue.
PiperOrigin-RevId: 503153982
(cherry picked from commit e961c1b5e9bb4a6f63458b1bdcb49e97f415fabf)
We currently only document it for the getCurrentMediaItem(), but
the command was always meant to cover all information about the
current media item and the position therein.
To correctly hide information for controllers, we need to filter
the Timeline when bundling the PlayerInfo class if only this
command is available.
PiperOrigin-RevId: 503098124
(cherry picked from commit f15b7525436b45694b5e1971dac922adff48b5ae)
When bundling PlayerInfo, we need to remove information if the
controller is not allowed to access it. This was only partially
done at the moment.
PiperOrigin-RevId: 502852798
(cherry picked from commit 69cfba7c53b563577390e4074fd270f078bf6069)
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
(cherry picked from commit c90ca7ba5fb9e83956e9494a584ae6b0620e3b14)
PlayerWrapper advertises PlaybackStateCompat actions to the legacy
MediaSession based on the player's available commands.
PiperOrigin-RevId: 502559162
(cherry picked from commit 39f4a17ad4ac3863af22e12711247c7a87b8613e)
This player didn't fully check all player commands before calling the
respective methods.
PiperOrigin-RevId: 502353704
(cherry picked from commit a2a44cdc02abadd473e26e1fd9f973210d4c5f0e)
The method to dispatch actions in MediaControllerImplBase takes
a Player.Command, but the value is only used to check if we
are setting a surface and need to handle the special blocking
call. This can be cleaned up by removing the parameter and calling
a dedicated blocking method where needed. This also ensures we
have to mention the relevant Player.Command only once in each
method.
PiperOrigin-RevId: 502341862
(cherry picked from commit 664ab72d090196625b5f533e9f0a2112951c5741)
This avoids throwing exceptions for correct (but deprecated) Player
method invocations.
PiperOrigin-RevId: 502341428
(cherry picked from commit 86a95c2a4afd861986376f9dc31e0d65910e6e74)
This fix applies to Android 12 and above.
In this fix, the `MediaSessionService` will try to start in the foreground before the session playback resumes, if ForegroundServiceStartNotAllowedException is thrown, then the app can handle the exception with their customized implementation of MediaSessionService.Listener.onForegroundServiceStartNotAllowedException. If no exception thrown, the a media notification corresponding to paused state will be sent as the consequence of successfully starting in the foreground. And when the player actually resumes, another media notification corresponding to playing state will be sent.
PiperOrigin-RevId: 501803930
(cherry picked from commit 0d0cd786264aa82bf9301d4bcde6e5c78e332340)
This method allows to call through to `StreamManager.focus()` of the currently playing SSAI stream.
PiperOrigin-RevId: 501399144
(cherry picked from commit 16285ca5dfd4461334f5e97d4de47ae07e49e883)
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
(cherry picked from commit 20aa5bd9263f594e4f1f8029c5b80e9f204bff3a)
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
(cherry picked from commit 9882a207836bdc089796bde7238f5357b0c23e76)
Initialising the fields as Integer and then getting a String on compute
time is slow. Instead we directly initialise these fields as String.
Improves the time taken in bundling PlayerInfo further to less than
200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
(cherry picked from commit 578f2de48f795ad90aafdad645c62fcdbd686e0a)
As per the javadoc for AtomParsers.parseTrack, ParserException should be "thrown if the trak atom can't be parsed."
PiperOrigin-RevId: 499522748
(cherry picked from commit d8ea770e9ba6eed0bdce0b359c54a55be0844fd3)
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
(cherry picked from commit 790e27d929906a36438af5b42ef62a13e4719045)
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
(cherry picked from commit 0512164fdd570a2047f51be719aae75ebcbf9255)
Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
(cherry picked from commit 7fc2cdbe1bdf9968a1e73a670e5e32454090e1bd)
Added another check in test to make sure we don't add keys to bundle for fields with `null` values.
PiperOrigin-RevId: 496948705
(cherry picked from commit 13c93a3dd693e86e6d5208aff45105000858363f)
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
(cherry picked from commit 4087a011e21aba2c27e3ae890f74a65812c6f4ce)
Users of this class may run into these assertions when creating the
State and they need to check the source code to understand why
the State is invalid. Adding error messages to all our correctness
assertions helps to understand the root cause more easily.
PiperOrigin-RevId: 496875109
(cherry picked from commit 6c98f238e45d19a14041d58f5938f3399da04eb5)
Also clean up the strict mode violations of using `BitmapFactory.convertToByteArray` on the main thread.
PiperOrigin-RevId: 496422355
(cherry picked from commit d848d3358a67ce2439db7cf170eec7b8c3ecffbf)
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
(cherry picked from commit 5fa115641d5b45b106844f3e629372417eb100b1)
The period updates were introduced to ensure the buffered position is
updated regularly and that any playback position drift is corrected.
None of these updates need to happen while the player is paused or
not loading and we can avoid the constant binder interactions.
PiperOrigin-RevId: 496329800
(cherry picked from commit 0749b05923dd733bb515920334a9aae6067a072f)
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
(cherry picked from commit 49ccfd63834d8ee68ac8018c42172da05108b35a)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1954f7e0a334492ffa35cf535d2e6c4e4c9ca91)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 3e7f53fda77048731d22de0221b0520a069eb582)
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
(cherry picked from commit d11e0a35c114225261a8fe472b0b93d4a8a6b727)
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
(cherry picked from commit 545fa5946268908562370c29bd3e3e1598c28453)
This ensures they are not accidentally triggered again when
the state is rebuilt with a buildUpon method.
PiperOrigin-RevId: 495280711
(cherry picked from commit a1231348926b4a88a2a8cb059204c083e304f23f)
This improves the time taken to construct PlayerInfo from bundle from ~600ms to ~450ms.
PiperOrigin-RevId: 495055355
(cherry picked from commit 395cf4debc52c9209377ea85a319d2e27c6533ce)
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit 6e7de583bb42871267899776966575512152b111)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit ab6fc6a08d0908afe59e7cd17fcaefa96acf1816)
