To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
Issue: When running the Transformer related test cases, the tests are flaky
because the order in which audio and video samples are interleaved seems to
differ in few instances.
Root cause: When running a transformation the sample producer (Asset loader)
and sample consumer (Sample pipeline) both runs on different thread and
theoretically there is no reason for behaviour to be deterministic because
the number of samples produced/written depends on how fast individual thread
works. So it is indeed surprising that test somehow worked deterministically in
majority of instances (may be something to do with Robolectric environment).
Solution: Since we don't expect the order of sample interleaving to be deterministic, make the dumping logic deterministic where all the video
samples will be collected and then dumped together (similarly for audio). This would mean we won't be able to see the interleaving so for that we need to
add separate test case verifying the interleaving logic only.
Pending: Test case for interleaving.
PiperOrigin-RevId: 540930871
Previously, TextureMangers have a method to signal ending of a current input
stream, and a method to end the **entire input**. The responsibility of both
methods are not easy to document, understand and read.
With the new design,
- Only `TextureManager.signalEndOfCurrentInputStream()` is kept
- It's called for every MediaItem in the sequence, include the final one
- FinalWrapper now takes explicit signal that frame processing is ending,
rather than relying on the return value of `onCurrentInputStreamProcessed()`
- On DVFP receiving EOS from the pipeline, it signals FinalWrapper the stream
is ending, **before** signaling the input switcher, so that FinalWrapper is
able to end the stream when the onCurrentInputStreamEnded signal eventually
reaches FinalWrapper
PiperOrigin-RevId: 540856680
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
Additionally, two existing methods to `buildDataSpec` in `DashUtil` have been deprecated, while a new method has been added that allows the inclusion of `httpRequestHeaders`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540594444
I created this by:
1. Downloading https://storage.googleapis.com/exoplayer-test-media-1/mkv/android-screens-lavf-56.36.100-aac-avc-main-1280x720.mkv
2. Crafting a `test.srt` file with a text editor
3. Muxing them together:
```
$ mkvmerge -o android-screens-with-subrip.mkv \
android-screens-lavf-56.36.100-aac-avc-main-1280x720.mkv \
test.srt
```
Tested in the demo app, the subtitle track is selected by default
(default behaviour for Matroska spec afaict).
PiperOrigin-RevId: 540577912
Current behaviour causes an app to crash if it receives an unrecognized repeat mode send over the wire. In order to avoid the crash, a sensible default had to be chosen.
For `Player.RepeatMode`, it is `Player.REPEAT_MODE_OFF`, which is the same value we use as default when unbundling `PlayerInfo`.
For `PlaybackStateCompat.RepeatMode`, it is `PlaybackStateCompat.REPEAT_MODE_NONE`, which is what we use in the no-arg `LegacyPlayerInfo` constructor.
Issue: androidx/media#448
#minor-release
PiperOrigin-RevId: 540563792
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
This helps debug bitmap tests. Without this CL, I typically
need to go into the file to find the test name and absolute
path. With this CL, I can just adb pull the printed file path,
which is much simpler.
PiperOrigin-RevId: 540539042
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
Partially roll forward of 5c29abbbf4, and adds some extra logic
Changes to the original CL
The original logic (a66f08ba97) fails in the following case:
> This is only seem on emulators.
- EOS is sent to ExtTexMgr
- The timer starts
- One frame arrives on SurfaceTexture, reset the timer
- The frame is sent for processing, now `availablFrames == 0`
- One frame arrives on Surface, reset the timer
- The frame is kept on SurfaceTexture for the downstream shader doesn't have
capacity, `availablFrames == 1`
- Timer times out as the downstream processor doesn't report being able to take
another frame.
- Although there's a frame available on the SurfaceTexture
This is solved by having the force EOS logic clear all the frames that the
SurfaceTexture holds. This also ensures the first frame dequeued from the next
stream isn't from the previous stream.
PiperOrigin-RevId: 540023359
Currently, the implementation of `MediaControllerImplBase` differs from `ExoPlayerImpl`. The listeners of the former are notified of player error changes only in `onPlayerInfoChanged` and not `updatePlayerInfo` (masking method). Whereas `ExoPlayerImpl` has one unified method - `updatePlaybackInfo` - which sends the events to all the available listeners.
This change fixes the lack of 2 particular callbacks - `onPlayerErrorChanged` and `onPlayerError`, however, there might be more differences. Ideally, there should be a unified method for oldPlayerInfo/newPlayerInfo comparison-update-notify-listeners flow.
Issue: androidx/media#449
#minor-release
PiperOrigin-RevId: 539961618
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This change addresses the case when the user joins the live stream
on an ad period but the metadata for the ad period is not emitted.
This results in inserting a partial ad group.
In this case the ad group duration is longer than the partial ad
group. If now the partial ad group ends at the period before the
last period of the window (unknown duration), the splitting algorithm
didn't recognize that the ad group already ended and made the last
period wrongly an ad period.
This change handles this edge case by counting the mapped ads in
the partial ad group to detect this situation and stops splitting.
#minor-release
PiperOrigin-RevId: 539102785
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
