This CL is prework for implementing
`RandomParameterizedSpeedChangingAudioProcessorTest`, which will build
on logic present in `RandomParameterizedSonicTest`.
This is a non-functional change.
PiperOrigin-RevId: 684838017
Inconsistent rounding modes between `currentTimeUs` and
`bytesUntilNextSpeedChange` would cause `SpeedChangingAudioProcessor`
to miss calling `queueEndOfStream()` on `SonicAudioProcessor` on a speed
change, and thus the final output samples of that `SonicAudioProcessor`
"configuration" would be missed.
This change is also a partial revert of 971486f5f9, which fixed a hang
of `SpeedChangingAudioProcessor`, but introduced the dropped output
frames issue fixed in this CL (see b/372203420). To avoid reintroducing
the hang, we are now ignoring any mid-sample speed changes and will only
apply speed changes that are effective at a whole sample position.
PiperOrigin-RevId: 684824218
This helps avoid overflows in intermediate calculations.
Verified the value in the test using `BigInteger`:
```
jshell> BigInteger.valueOf(1L << 52).multiply(BigInteger.valueOf(90000)).divide(BigInteger.valueOf(1000000))
$3 ==> 405323966463344
```
Issue: androidx/media#1763
#cherrypick
PiperOrigin-RevId: 684028178
The implementation of these methods was updated from direct java integer
arithmetic in 885ddb167e.
In this change, `RoundingMode.FLOOR` was used to try and maintain
compatibility with java integer division. This was incorrect, because
java integer division uses `DOWN` (i.e. towards zero), rather than
`FLOOR` (i.e. towards negative infinity) semantics.
This change fixes the compatibility.
The dump file changes in this CL relate to tests that exercise edit
list behaviour. This involves manipulating negative timestamps, which
explains why they are impacted by this change.
PiperOrigin-RevId: 684013175
This CL also fixes EOS handling to account for not-yet-copied samples in
`remainingInputToCopyFrameCount`, which would throw off the final output
sample count calculation.
For testing, we allow a tolerance of 0.000017% drift between expected
and actual number of output samples. The value was obtained from running
100 iterations of `timeStretching_returnsExpectedNumberOfSamples()` and
calculating the average delta percentage between expected and actual
number of output samples. Roughly, this means a tolerance of 40 samples
on a 90 min mono stream @48KHz.
PiperOrigin-RevId: 683133461
The MetadataRenderer by default supports icy and vnd.dvb.ait content. Those tracks should therefore be set with the `C.TrackType` `TRACK_TYPE_METADATA` rather than `TRACK_TYPE_UNKNOWN`.
PiperOrigin-RevId: 679132680
Note that unlike the legacy implementation, custom media items
commands can be used for any media items with Media3 API. This
includes `MediaItem` instances that are received from sources
different to `MediaLibraryService` methods.
Hence when connected against a Media3 session these custom commands
can be used with a `MediaController` as well as with a `MediaBrowser`.
Interoperability with `MediaBrowserServiceCompat` will
be added in a follow up CL.
Issue: androidx/media#1474
#cherrypick
PiperOrigin-RevId: 678782860
This CL adds `SonicTest` and `RandomParameterizedSonicTest` as
initial basic unit testing for `Sonic.java`. The tested scenarios
do not necessarily verify a correct implementation of Sonic, but rather
hope to catch any behaviour change from the current implementation.
The change includes a small fix for a lossy simplification and also
checks whether the output sample count matches the expected drift from
the truncation accumulation error present in Sonic's resampler. This is
important as pre-work for fixing issues with unexpected durations within
`SonicAudioProcessor` and `SpeedChangingAudioProcessor` that cause AV
sync issues for speed changing effects.
This is a partial roll forward of e88d6fe459, which was rolled back in
873d485056.
PiperOrigin-RevId: 677756854
This is no longer needed now our `compileSdk` implies a new-enough AGP
which does this out-lining automatically via R8. See also
https://issuetracker.google.com/345472586#comment7
There's no plan to remove the `ApiXXX` classes, but no new ones need
to be added.
PiperOrigin-RevId: 675940634
To support for 3gpp h263 codec in Mp4Muxer currently profile and level is hardcoded and provided to h263 box. Parse profile and level from MediaFormat and use those value to write h263 box.
PiperOrigin-RevId: 675004590
Sonic would accumulate truncation errors on float to int conversions
that caused the final output sample count to drift noticeably, by
hundreds of samples on streams of a few minutes of length. The fix now
keeps track of the truncation error and compensates for it.
Other small fixes include eliminating lossy operations (e.g. int
division) and using doubles instead of floats for resampling where
helpful.
This CL also introduces `SonicParameterizedTest`, which helps test
resampling on an arbitrary number of randomly generated parameters,
with random sample data. `SonicParameterizedTest` uses `BigDecimal`s
for calculating sample count values, as to avoid precision issues with
large sample counts.
PiperOrigin-RevId: 673852768
When processing edit lists in MP4 files, the media start position may be a non-keyframe. To ensure proper playback, the decoder must preroll to the preceding keyframe, as these preroll samples are essential for decoding but are not rendered.
Issue: google/ExoPlayer#1659
#cherrypick
PiperOrigin-RevId: 673457615
`Muxer` module needs to use this method, hence moved to common.
This CL also makes `getHevcProfileAndLevel` public because this is used
in `MediaCodecUtil`.
PiperOrigin-RevId: 671739166
Before this, because `Label.toString()` isn't implemented, the logged info
wasn't that useful:
```
labels=[androidx.media3.common.Label@6caac039]
```
With this change it's more useful:
```
labels=[en: english]
```
PiperOrigin-RevId: 671029474
These were missed when upgrading to both SDK 19 and 21, but they now
cause failures like:
```
Caused by: java.lang.RuntimeException: Failed to parse package buildout/intermediates/apk_for_local_test/debugUnitTest/packageDebugUnitTestForUnitTest/apk-for-local-test.ap_: buildout/intermediates/apk_for_local_test/debugUnitTest/packageDebugUnitTestForUnitTest/apk-for-local-test.ap_ (at Binary XML file line #20): Requires newer sdk version #21 (current version is #19)
at org.robolectric.shadows.ShadowPackageParser.callParsePackage(ShadowPackageParser.java:61)
... 20 more
```
#cherrypick
PiperOrigin-RevId: 670241471
Make ByteBufferGlEffect public.
Build a speed test, and end to end test that verify
frames can be copied to CPU-accessible ByteBuffer
PiperOrigin-RevId: 670213343
Adds a class that represents an image rectangle
in OpenGL coordinate convention.
android.graphics.Rect puts (0, 0) as the top-left corner:
it enforces `Rect.top <= Rect.bottom` and this matches
`android.graphics.Bitmap` coordinates: docs https://developer.android.com/reference/android/graphics/Rect
This is different from OpenGL coordinates where (0, 0) is
at the bottom-left corner. I.e. GlRect.bottom <= GlRect.top: docs https://registry.khronos.org/OpenGL-Refpages/es3.0/html/glReadPixels.xhtml
The reason for this change is to allow a public API GlRect
getScaledRegion() which selects a region of pixels of a GL texture
to be copied to CPU memory.
PiperOrigin-RevId: 669231826
* Changes to GlUtil to manage Pixel Buffer Objects and asynchronous
GPU -> CPU glReadPixels
* Make ByteBufferConcurrentEffect non-blocking
PiperOrigin-RevId: 667908805
Implement a QueuingGlShaderProgram which queues up OpenGL frames and allows
asynchronous execution of effects that operate on video frames without a
performance penalty.
PiperOrigin-RevId: 666326611
Previously in MultiInputVideoGraph, each VFP would destroy the shared
eglContext, such that the same eglContext object is destroyed multiple times.
Adding a flag to disallow this.
The alternative being we could add a flag on the VFP constructor, but I think
that is too subscriptive (meaning if we later might want to add another boolean
to control another GL behaviour, multiple booleans would make the class less
reason-able), and would incur a lot of code changes at places.
PiperOrigin-RevId: 660354367
Instead of hard-coding values in multiple files, all default values are declared in `IamfDecoder`. Additionally, the max number of frames used for output buffer initialisation is fetched from `libiamf` native functions.
PiperOrigin-RevId: 658772175
Transformer.experimentalSetMaxFramesInEncoder controls max number
of frames in encoder.
VideoFrameProcessor now allows delayed releasing of frames to Surface,
while still using the original presentation time.
VideoSampleExporter can now configure video graphs to not render frames
automatically to output surface.
VideoSampleExporter.VideoGraphWrapper tracks how many frames are ready
to be rendered to Surface, and how many frames are already in-use by encoder.
PiperOrigin-RevId: 658429969
-----
Context:
* Each sequence is wrapped as a single MediaSource, each being played
by an underlying ExoPlayer.
* Repeat mode is typically implemented in Players as a seek to the next
item in the playlist.
-----
This CL:
Repeat mode is triggered by listening for when the main input player
sees a play when ready change due to the end of the media item.
There is a slight delay at the end of the playback, before it repeats.
Setting repeat mode on the underlying players addresses this, but means
that the players will seek without waiting for the CompositionPlayer,
and as such previewAudioPipeline does not get the correct signals
around blocking/flushing.
PreviewAudioPipeline - The seek position can validly be C.TIME_UNSET,
however preview pipeline did not handle this case.
CompositionPlayer getContentPosition is given (through a lambda) as a
supplier to the State object, which means any comparisons between
previous/new state for this value does not work. In SimpleBasePlayer,
there is logic to use the positionDiscontinuityPositionUs for the
position change (see getPositionInfo called from
updateStateAndInformListeners), however this logic is not considered in
getMediaItemTransitionReason, so a condition needed to be added for
this case.
-----
Tests:
* Dump files clearly show the position and data is repeated.
* Assertions on the reasons for transitions or position
discontinuities.
PiperOrigin-RevId: 653210278
