The media item needs to be assigned to `Window.mediaItem` in `CastTimeline.setWindow`. For this the `MediaItem` needs to be available in the timeline.
When a `MediaItem` is passed to the `set/addMediaItems` method, we can't yet know the Cast `MediaQueueItem.itemId` that is generated on the device and arrives with an async update of the `RemoteMediaClient` state. Hence in the `CastTimelineTracker`, we need to store the `MediaItem` by Casts's `MediaItem.contentId`. When we then receive the updated queue, we look the media item up by the content ID to augment the `ItemData` that is available in the `CastTimeline`.
Issue: androidx/media#25
Issue: google/ExoPlayer#8212
#minor-release
PiperOrigin-RevId: 460325235
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e8581701e12743626f49823a667d9f05ed68)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2daba8e0ed2497cbf17f4b834e58c59a4)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
#minor-release
PiperOrigin-RevId: 455115567
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d063ba4a7f7e9fe8089228394bf1f97b)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd76730fd4042e8b2226300e5173b0179dc1)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08ec22a1b5153af152b456d36099f401)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 86973382335156abaa76770c6897d28460fdde36)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5497615572bcdf259278a899b4574f8)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
