When seeking in fMP4, we try to extract as little samples as possible
by only starting at the preceding sync frame. This comparison should
use <= to allow sync frames at exactly the seek position.
Issue: google/ExoPlayer#10941
#minor-release
PiperOrigin-RevId: 505098172
Added onSetMediaItems callback listener to allow the session to modify/set MediaItem list, starting index and position before call to Player.setMediaItem(s).
Added conditional check in MediaSessionStub.setMediaItem methods to only call player.setMediaItem rather than setMediaItems if player does not support COMMAND_CHANGE_MEDIA_ITEMS
PiperOrigin-RevId: 503427927
Starting with API 33 the POST_NOTIFICATION permission needs to be
requested at runtime or the notification is not shown.
Note that with an app with targetSdkVersion < 33
but on a device with API 33 the notification permission is automatically
requested when the app starts for the first time. If the user does not
grant the permission, requesting the permission at runtime result in
an empty array of grant results.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501320632
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
The MediaSourceFactory won't be used by the other AssetLoaders
In order to do that, ExoPlayerAssetLoader has been made public, and the
DefaultAssetLoaderFactory has become a wrapper around
ExoPlayerAssetLoader.
PiperOrigin-RevId: 496386853
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
This avoids that apps have to depend on the legacy compat support
library when they want to make this conversion.
Also add a version to both helper methods that takes a Looper to
give apps the option to use an existing Looper, which should be
much faster than spinning up a new thread for every method call.
Issue: androidx/media#171
PiperOrigin-RevId: 490441913
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
The connection to a legacy MediaSession may receive additional
onSessionReady callbacks that are treated as additional state updates.
We currently also set the "notifyConnected" flag for these updates
even though we are connected already, causing an IllegalStateException.
Fix the exception by not setting this flag.
We can also remove the wording about "locked" updates since this class
operates everything on a single application thread.
Issue: androidx/media#49
PiperOrigin-RevId: 487487286
If an app sets a compileSdkVersion that is lower than the one used to
create AARs of its dependencies, the build process may produce invalid
outputs, for example by stripping methods from the APK that are only
called when the app is running on a new API version.
To avoid this issue, we can enforce that the compileSdk of apps or
libraries depending on ExoPlayer/Media3 is at least the same as the
one we used for compilation when creating the AAR.
Issue: google/ExoPlayer#10684
PiperOrigin-RevId: 485100067
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
