Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
(cherry picked from commit 4cf7d3c7acc7244bcbf2998f9fdb43c100ce51e1)
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
PiperOrigin-RevId: 512658918
(cherry picked from commit d363977156b49c1fe793bfc9709eb00595bfae6c)
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
(cherry picked from commit a02c8d855c8eae8cb3132365548ecf7a0730815b)
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
(cherry picked from commit 04f0cc949f0d524d5a8ab367a15716175bacf18f)
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
(cherry picked from commit 39935d7f1202a4e327b968815bf499cc7bcab4c4)
This test became flaky after cbb6878f9f because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
(cherry picked from commit 13700e0aec06b2a7f5ed0d710690b44dbb7146bc)
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
(cherry picked from commit 34b9824201314b4fa6442deac643635f2fa9e541)
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
PiperOrigin-RevId: 511787571
(cherry picked from commit 4e0babdcd1c272c5470572e3b29dc15e42e9221a)
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
(cherry picked from commit cbb6878f9fef20ea440c6ffda77dd4edc00ce1f2)
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
(cherry picked from commit 829b49d724ed220e7d58397dfdf97752aac73696)
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
(cherry picked from commit a5f4651d555de8c5e99405b002bcf536cae4567e)
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
(cherry picked from commit 5e3cd7a3c3f2cd590d77ccd318c5ba4824f414b8)
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
(cherry picked from commit 4ede931c2a7ad11003194cb0ee638535ecab7f31)
In MediaCodecUtil, use Format.colorInfo, besides the codec string,
to accurately map to a 10bit HEVC profile.
PiperOrigin-RevId: 507500071
(cherry picked from commit 80dbaca0e520c32a599a379feedb49e6bed3de30)
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
(cherry picked from commit eb8fffba15810b8206653d8ffaff233d823fbfc9)
MergingMediaPeriod creates its track groups with ids concatenating position in its periods array and the underlying child track group id. The ids can be used in selectTracks for matching to periods list.
Issue: google/ExoPlayer#10930
PiperOrigin-RevId: 505074653
(cherry picked from commit ee055ef004686ddb3844666f9506a95c6e16a59f)
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
(cherry picked from commit 055ed77433944fc31d431d65e09514e8b3e250f1)
Initialising the fields as Integer and then getting a String on compute
time is slow. Instead we directly initialise these fields as String.
Improves the time taken in bundling PlayerInfo further to less than
200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
(cherry picked from commit d49437c6e112e60e9c85edeef73a73bce7de939a)
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
(cherry picked from commit 5e23b8bfd5a9a9542c2ab8d23ae51c1689d8ff51)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1c0b10482baffc3721561446ee4bb788d8a1231)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 74559b4a188e476378f3f0df908598ce763d909a)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit 6e0f1f10b3666e6c2c74fc5a154dec3f0e03fecb)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit e9364b0f6e1a104de9cf4393daab521edc4eccf4)
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
(cherry picked from commit 2f8cf947c71db6be9459492117fe95b1a8bc7178)
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
(cherry picked from commit 5f6fde4d2a90d78a8d58430c88d7dc12849fe163)
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
(cherry picked from commit e219ac21ae604f182769d69f6f590191a92100d0)
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
(cherry picked from commit 4cf877b81428021c4eb2dfa1a743178f280aceb5)
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
(cherry picked from commit 7d62943bcd149eecce77cb44e4f867128ca374d3)
When estimating the AudioTrack min buffer size, we must use a PCM
frame of 1 when doing direct playback (passthrough). The code was
passing -1 (C.LENGTH_UNSET).
PiperOrigin-RevId: 489238392
(cherry picked from commit d9d716869b7df2cd95704e9ac24a5f9a376afa2c)
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
(cherry picked from commit 79b809b5563260cd20541afe607e36ae351fbbed)
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
(cherry picked from commit 1eb8a6b36ed98bd66a5bad5273526a918511a39f)
This tag is only understood by Dackka, which is used to generate the media3 javadoc.
PiperOrigin-RevId: 489233200
(cherry picked from commit 058cba95d40db83c77f4dd0aa8cb561221463b3a)
This better matches the callback name (onSurfaceSizeChanged) and
probably cause less confusion with getVideoSize.
PiperOrigin-RevId: 488669786
(cherry picked from commit 8438daca1f8cbea24aa414ee500044baf1a28367)
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
(cherry picked from commit 1b24e6fd14774d5c8b3e7b8084b30204581d13ce)
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
(cherry picked from commit 20151b9930f1b54d7894ec41465a2e85df92462d)
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
(cherry picked from commit 13ee34faccaf98ff90850601f40c95622b1e878b)
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
(cherry picked from commit 10c4a4dfc172cfac77528c7cb746fe827ca6f78c)
