The flag in ExoPlayer.prepare is documented as keeping the current window
index and window position. We are currently using the current period UID and
period position instead. This causes problems when the media source is changed
but the position is not reset.
Using the initial seek position instead ensures we actually use the window
index and position.
Issue:#5520
PiperOrigin-RevId: 236101024
Adding new error types may cause issues when listeners assume a fixed set of
error types and don't handle arbitrary defaults.
Fixing error handling in one case and improving documentation to make people
aware of the issue.
PiperOrigin-RevId: 236093265
*** Reason for rollback ***
Reverting as this may break playback on other Amlogic devices and/or playback of non-interlaced content.
*** Original change description ***
Add max video size workaround for Amlogic decoder.
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
***
PiperOrigin-RevId: 234967314
HlsSampleStream#read should return end of stream when
there is no mapping for the sample stream, instead of
nothing read. This allows the player to transition to
ended.
Issue:#5524
PiperOrigin-RevId: 234764027
This bug affects any playlist that uses initialization segments. In practice,
almost exclusively fragmented mp4 segmented playlists are affected.
The bottom line is that extractors are chosen for reuse after the
initialization segment connection is open. However, reused extractors
do not need re-parsing the init segment, so loading the initialization is
wasteful.
PiperOrigin-RevId: 234479467
Previously we would get a new AudioTrack and flush all audio processors if any
AudioProcessor needed to be flushed on reconfiguration. This was problematic for
the case of TrimmingAudioProcessor because it could become active or inactive
due to transitioning to a period with gapless metadata or without it (we don't
keep it active all the time because it is wasteful to populate its end buffer
for content that is not gapless).
This change handles the case where we don't need an AudioTrack but
AudioProcessors do need to be flushed. In this case we drain all the audio
processors when next handling data then switch to the new configuration.
This avoids truncation when period transitions change whether
TrimmingAudioProcessor is active but don't require a new AudioTrack, and is also
a step towards draining the AudioTrack when transitioning between periods if we
do need a new AudioTrack.
To do this, it needs to be possible to drain any pending output data from an
AudioProcessor after it's configured to a new format, so this change makes sure
AudioProcessors allow calling playToEndOfStream and getOutput after
reconfiguration and before flush.
PiperOrigin-RevId: 234033552
Stop encoding/decoding presentation time as part of the message.
What's actually in emsg boxes is a presentation time delta,
which is why it's only 32 bits, and hence why it doesn't handle
large absolute timestamps. We were using this field to hold
absolute timestamps only for the purpose of passing presentation
times from DashManifestParser.parseEvent back to the calling
method. After this change, we return Pair<Long, EventMessage>
instead.
Issue: #5490
PiperOrigin-RevId: 233561731
Switch from passing an ad UI ViewGroup to passing an object that can also
provide information about controls overlays.
Also switch to using a dedicated overlay for ads instead of the overlay frame
layout, which apps have easy access to.
PiperOrigin-RevId: 233393500
Supporting multiple overrides allows to select tracks from multiple groups, if
enabled. As more options are added, the creation of the dialog is moved to a
separate builder class.
PiperOrigin-RevId: 233366282
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/5438
Plus the following changes:
- Only support profile 5 (handling other profiles requires
backward-compatibility changes in the renderer which are left for a later
change.)
- Only add KEY_PROFILE to the codec configuration MediaFormat for Dolby Vision.
- In MediaCodecUtil support all DV profiles that Android has constants for. This
includes ones that are "not supported for new applications". Since we don't
extract these profiles, this is currently only for the benefit of custom
extractors.
- Misc code style fixes and reordering for consistency.
Merge 37878b975c2bc082b0568e21cbe62bfcef97c10d into 67be9e77834c0dc9d2b5d462c01c2f39718c8817
PiperOrigin-RevId: 233066799
Given the change to require setPlayer on AdsLoaders, it seems like a good
opportunity to clean up deprecated ads-related symbols.
PiperOrigin-RevId: 233020171
When calling releaseSource(), all pending messages will be removed. That means
that all action-on-completion callbacks which are somewhere in flight are
just dropped without being called. This change adds code to keep track of the
current state of each callback to allow all of them being called when the
source is released.
Issue:#5464
PiperOrigin-RevId: 232312528
It better describes what the class does. More importantly, we've had
inconsistent class names since we added offline support, for which we
added ProgressiveDownloader ("ExtractorDownloader" doesn't make any
sense). We could really do with aligning the names for clarity.
(Sorry)
PiperOrigin-RevId: 231387268
The combination of pre-16 API levels accounting for ~0.5% of the device
population, and that the most important components in ExoPlayer (e.g.
the MediaCodec renderers) have always required API level 16, mean it's
very unlikely this will negatively impact on anyone.
PiperOrigin-RevId: 230701808
ExoPlaybackExceptions of type SOURCE are always associated with the loading
period and thus we can use the event time for the loading period in
onPlayerError. Renderer and unexpected exceptions are still associated with the
currently playing period.
Issue:#5407
PiperOrigin-RevId: 230216253
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
PiperOrigin-RevId: 230206675
That's the same position set in MediaPeriod.prepare (where it may be removed
in the future).
Having the position at an earlier point is necessary to fix an
issue with lazy preparation in ConcatenatingMediaSource where the prepare
position was assumed to be known but MediaPeriod.prepare hasn't been called
yet.
Issue:#5350
PiperOrigin-RevId: 229756637
The buffered position is currently based on the mimimum queued timestamp of
all AV tracks. If the tracks have unequal lengths, one track continues loading
without bounds as the "buffered position" will always stay at the shorter
track's duration.
This change adds an optional buffer flag to mark the last sample of the
stream. This is set in the Mp4Extractor only so far. ExtractorMediaSource
uses this flag to ignore AV streams in the buffered duration calculation if
they already finished loading.
Issue:#3670
PiperOrigin-RevId: 229359899
DataSpec.FLAG_ALLOW_CACHE_FRAGMENTATION is added to indicate to the
cache when fragmentation is allowed. This flag is set for progressive
requests only.
To avoid breaking changes, CacheDataSink defaults to ignoring the flag
(and enabling fragmentation) for now. Respecting the flag can be
enabled manually. DownloaderConstructorHelper enables respecting of
the flag.
Issue: #4253
PiperOrigin-RevId: 229176835
We currently forget whether a source is seekable at re-preparation. This was
implemented intentionally this way under the assumption that we really can't seek
until we have loaded the seek map again. However, seek operations are only
allowed after a media period is prepared. So there is no harm in remembering
whether a source is seekable.
This problem currently prevents reusing ClippingMediaSources with
ExtractorMediaSource and a non-zero start clip position.
Issue: #5351
PiperOrigin-RevId: 229169441
They are not longer needed anywhere, are error-prone (because of threading
requirements), and complicate testing and using MediaSources without a player.
PiperOrigin-RevId: 227871157
We currently either use the app thread returned by the player or the thread
the commands are called on depending on whether the media source is already
prepared or not.
This change lets the application decide which callback thread to use. As a
side effect, we also don't longer need access the player instance passed to
MediaSource.prepare.
PiperOrigin-RevId: 227871111
Also configure the FFmpeg context to ignore errors as far as possible (this
appears to have an effect only for certain decoders).
Issue: #5293
PiperOrigin-RevId: 227851397
Passing the player through MediaSource.prepare is only needed for the AdsLoader
and complicates other usages of MediaSource. Providing the player directly to
the AdsLoader is also in line with the usage pattern of PlayerView and other
components.
Also rename methods to start/stop to better reflect their usage.
PiperOrigin-RevId: 227682112
Made DownloadState top level class.
Replaced action field DownloadAction fields.
Added removing, removed and restarting states.
Renamed started state to downloading.
PiperOrigin-RevId: 227664735
ExoPlayer methods must not be called from any thread besides the specified
app thread. Therefore we shouldn't use them here. Using a regular Handler
instead is fully equivalent.
Issue:#5240
PiperOrigin-RevId: 227650489
