AdDisplayContainer now takes the video ad player at construction time,
and obstructions are registered/unregistered via a new method. Also
'content complete' is now notified via ad callbacks rather than the
AdsLoader.
PiperOrigin-RevId: 320567666
The wait time parameter is an implementation detail where we can just
provide a default.
In addition, we should also force the evaluation when the last chunk
in the queue changed to ensure it is always evaluated before starting
to load a new chunk.
Issue: #7582
PiperOrigin-RevId: 319949251
Clearing the exception puts the SimpleDecoder into a silent failure
state - the decoder thread is dead (because decode() has returned
false) but it's still possible to queue buffers to the decoder (they
just never get decoded). This partially reverts
4107375c9d
Also always recreate the decoder when handling an error in TextRenderer
This ensures we can try and decode a later subtitle sample after
encountering a decode error. This behaviour is what nulling out the
exception in SimpleDecoder.flush() was trying to achieve. We need to
ensure we don't start passing data to the new decoder until we've
hit the next key frame, so we throw away any non-keyframe samples
inside TextRenderer#render().
Issue: #7590
PiperOrigin-RevId: 319785908
We don't need the renderer immediately after stopping, so the
renderer should not throw a checked exception until it's used again.
This is inline with the not throwing from disable().
Also, none of the known implementation throw an exception at the moment
and all reasonable base classes omit the throws clause already.
PiperOrigin-RevId: 319503643
Issue: #7011
Issue: #6725
Issue: #7066
This also mitigates (but doesn't fix) Issue: #4133 because it
prevents a second key load after a short clear section.
PiperOrigin-RevId: 319184325
- Deprecate constructors that don't take an executor, to direct
developers toward the new ones. Callers can trivially pass
Runnable::run to one of the new ones if they want old behaviour.
- Add comment explaining warning suppression added in the CL that
added parallelised download support.
Issue: #5978
PiperOrigin-RevId: 318803296
On reaching the end of the content we would notify content complete
and skip unplayed ads, causing a timeline change. That timeline change
was handled in a way that caused a further timeline change in the
2.11.6 release, where we don't yet deduplicate no-op Timeline changes,
causing repeated timeline changes indefinitely.
At tip-of-tree, the timeline wouldn't refresh repeatedly. However the
code for sending content complete at the point of transitioning to
play a preloaded postroll ad was not correct in that it didn't mark
previous ads as skipped. Instead they happened to be marked as
skipped later on due to the timeline change handling content
completion code triggering again.
Fix this by only marking ads as skipped when content completes once,
to avoid the duplicate timeline change, and moving the skipped ad
marking so it happens in the same place as notifying content complete.
PiperOrigin-RevId: 318454908
*** Reason for rollforward ***
Rollforward after making sure the handler is created,
and that a test is written preventing a
similar regression.
*** Original change description ***
Rollback of b6f5a263f7
*** Original commit ***
Rollforward of commit 5612ac50a332e425dc130c3c13a139b9e6fce9ec.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
PiperOrigin-RevId: 318274400
Numerical lines conceptually map to a grid of lines in the viewport,
with the Cue text lines being aligned to one of the viewport lines.
It doesn't make sense to position a single-line cue differently based
on lineAnchor when it's expected to 'snap' to a particular line on the
viewport grid. So we redefine the position to be in terms of the cue
lines rather than the bounds of the cue box.
It's also not possible to always handle ANCHOR_TYPE_MIDDLE when
lineType=NUMBER (as it relies on the number of lines in the cue being
odd), so it's easier to ignore lineAnchor completely.
PiperOrigin-RevId: 318034664
The IMA SDK now preloads postrolls which is great as we no longer need
to rely on detecting buffering at the end of the stream to trigger
playing postrolls.
Add in the required logic to detect the period transition to playing
the postroll.
Issue: #7518
PiperOrigin-RevId: 317610682
We currently get float ad cue points from IMA, but store these as
longs in microseconds. The cast from double to long would take the
floor of the value, which could lead to stored ad cue points being
off-by-one. Use Math.round to avoid this.
ImaAdsLoader also has code to map a double AdPodInfo position (which
should match a cue point) onto the corresponding ad group index by
searching the long ad cue points. Match the calculation used where we
map float cue points, including narrowing the position to a float
first to avoid regressions if IMA SDK behavior changes to represent
positions in more than float precision later, and also remove the
requirement that the ad positions match exactly as a defensive
measure.
PiperOrigin-RevId: 317607017
*** Original commit ***
Rollforward of commit 5612ac50a332e425dc130c3c13a139b9e6fce9ec.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it...
***
PiperOrigin-RevId: 316914147
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
***
PiperOrigin-RevId: 316898804
After an ad pod coming up has preloaded, if the user seeks before it
plays we get pauseAd/stopAd called for that ad pod. Also, the ad will
not load again. Work around this unexpected behavior by handling
pauseAd/stopAd and discarding the ad.
In future, it's likely that the IMA SDK will stop calling those
methods, and will loadAd again for the preloaded ad that was
unexpectedly discarded. This change should be compatible with that,
because the ad won't be discarded any more due to not calling stopAd.
Issue: #7492
PiperOrigin-RevId: 316873699
Ads can appear due to asynchronous ad tag requests completing after
earlier ads in a pod have loaded, so remove the requirement that the
ad count can't change. The MediaPeriodQueue should handling discarding
buffered content if an ad appears before already buffered content, so
I think this case is actually handled correctly by the core player
already.
Also remove the requirement that an ad URI can't change. This is a
defensive measure for now, but it's likely that a later fix in the IMA
SDK for an issue where loadAd is not called after preloading then
seeking before a preloaded ad plays will result in loadAd being called
more than once, and I think it's possible that the second call to
loadAd may have a different URI. Because the ad URI should only change
after an intermediate seek to another MediaPeriod, there shouldn't be
any problems with buffered data not getting discarded.
Issue: #7477
PiperOrigin-RevId: 316871371
The release() method was added in the recent IMA API changes for
preloading and now 'collides' with the ExoPlayer AdsLoader release
method. This led to all ads completing being treated as a call to
completely release the ads loader, which meant that the ad playback
state was not updated on resuming after all ads had completed, which
in turn led to playback getting stuck buffering on returning from the
background after all ads played.
Move the IMA callbacks into an inner class to avoid this.
Issue: #7508
PiperOrigin-RevId: 316834561
We haven't seen it used anywhere in practice. It's a niche feature not
supported by any other extractors, and is one of the very few things
stopping us from simplifying MediaSource implementations to not set the
decodeOnly sample flag. This is a simplification that we want to make,
since the current mechanism doesn't work properly for cases where a
downstream decoder adjusts the buffer presentation timestamps so that
they're different on the output side than on the input side.
PiperOrigin-RevId: 316712302
Some but not all VideoAdPlayer callbacks from the IMA SDK included
defensive handling of unexpected cases. Add the remaining ones.
Issue: #7492
PiperOrigin-RevId: 316082651
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
PiperOrigin-RevId: 315948869
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
PiperOrigin-RevId: 315860373
The option to cancel ongoing loads as part of the queue size evalation
was added recently. This split out the decision to a new method so that
a TrackSelection implementation can independently cancel loads and
discard upstream data. It also clarifies that evaluateQueueSize will
only be called if there is no ongoing load.
Issue: #2848
PiperOrigin-RevId: 315659735
ANSI/CTA-608-E R-2014 Annex B.5 says:
"The concept of a movable base row for a roll-up caption is new."
It means "new" compared to TC1 and TC2 (released in or before 1985).
Issue: #7475
PiperOrigin-RevId: 315258859
Output timestamps are calculated by the codec based on the buffers,
which is offset in Codec2. This adjusts the input timestamps as they
are passed in so they will match the output timestamps produced by
the MediaCodec.
PiperOrigin-RevId: 314963830
bear_vorbis_gap.ogg is a copy of bear_vorbis.ogg with 10 garbage bytes
(DE AD BE EF DE AD BE EF DE AD) inserted before the second capture
pattern and 3 garbage bytes inserted at the end (DE AD BE).
Issue: #7230
PiperOrigin-RevId: 314715729
