We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 424602011
AnalyticsCollector can't be null when passed into ExoPlayerImplInternal,
so there is no need to pass it around as nullable.
PiperOrigin-RevId: 424594031
Two of the sessions are finished at the same time in the test
and the order of the corresponding callbacks depends on the randomly
generated session string and the order these strings are stored in a
HashSet.
Update test to assert both callbacks are called and they contain the
right arguments, but don't assert on the order of these two callbacks.
PiperOrigin-RevId: 424548819
Ad playback shouldn't be affected by manual speed adjustments set
by the user. This change enforces unit speed for ad playback.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424546258
To avoid the `MediaPeriodQueue`to discard the reading period, we can set the next ad of an ad group early and then (possibly) only change it's duration once we receive the actual duration. This way we avoid a rebuffering as a result of the reading period being discarded.
The change also takes care to properly set ad break and their durations when we join the live stream at the moment when an ad is playing.
PiperOrigin-RevId: 423163467
We currently only end sessions on Timeline updates if the associated media
is no longer in the playlist. But we should also end all sessions that are
finished as a result of the timeline update (similar to how this is done for
discontinuities). This issue was introduced by 394ab7bcfd
PiperOrigin-RevId: 423075855
Adaptive video and audio selections will be limited to formats with
the same level of DecoderSupport and HardwareAccelatationSupport, unless
specifically allowed by new flags.
If different levels of decoder support are available, prefer primary
over fallback decoders and hardware-accelerated over software decoders
(in this order). For video, also prefer more efficient codecs, if both
are supported by hardware-accelerated primary decoders.
Issue: google/ExoPlayer#4835
Issue: google/ExoPlayer#9565
PiperOrigin-RevId: 422345048
This change moves the video track selection to the generic
selection method introcuced for audio and text. This ensures
we can apply the same criteria for fixed and adaptive video
track selections. Implicitly, this reorders the preferences
for adaptive tracks to give non-quality preferences (like
preferred MIME type or preferred role flags) a higher priority
than number of tracks in the selection.
Issue: google/ExoPlayer#9519
PiperOrigin-RevId: 422310902
Live speed adjustment is used for all live playback at the moment,
but has no user visible effect if the media is not played with low
latency. To avoid unnecessary adjustment during playback without
benefit, this change restricts the live speed adjustment to cases
where either the user requested a speed value in the MediaItem or the
media specifically defined a low-latency stream.
Issue: google/ExoPlayer#9329
PiperOrigin-RevId: 421514283
This ensures we test the API level specific logic, in particular
around 5G-NSA detection.
Robolectric has a remaining bug that it doesn't support listening
to service state changes. Hence, we need to ignore some tests on
these API levels still until this is fixed.
PiperOrigin-RevId: 421505951
The media codec renderers have fallback logic in getDecoderInfos
to assume that E-AC3 decoders can handle the 2D version of E-AC3-JOC and
that H264/H265 decoders can handle some base layer of Dolby Vision
content. Both fallbacks are useful if there is no decoder for the
enhanced Dolby formats.
Both fallbacks are not applied during track selection at the moment
because the separate MediaCodecInfo.isCodecSupported method verifies
that the mime type corresponding to format.codecs is the same as the
decoder mime type (which isn't true for the fallback case).
To fix the fallback logic, we can just completely remove this additional
check because it's not needed in the context of this method that is only
called after we already established that the decoder can handle the
format.sampleMimeType.
In addition, we need to map the Dolby Vision profiles to the equivalent
H264/H265 profile to make the codec profile comparison sensible again.
PiperOrigin-RevId: 420959104
* @Override is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs. @CryptoType is a TYPE_USE annotation, so should appear after modifiers and directly before the type.
PiperOrigin-RevId: 418811744
This more closely matches the pattern we have for all implementations
except DefaultMediaSourceFactory (e.g. ProgressiveMediaSource.Factory)
and other factory interfaces like (Http)DataSource.Factory.
PiperOrigin-RevId: 417826803
To support multi-period content we need to store AdPlaybackStates and SharedMediaPeriod by the periodUid as a key. While after this no-op CL, we still only support single-period content, storing these resources by periodUid is the ground work for multi-period support being added in an follow-up CL.
PiperOrigin-RevId: 416836445
We check the fraction of the available duration we have already
buffered for live streams to see if we can increase the quality.
This fraction compares against the overall available media duration
at the time of the track selection, which by definition can't include
one of the availabe chunks (as this is the one we want to load next).
That means, for example, that for a reasonable live offset of 3 segments
we can at most reach a fraction of 0.66, which is less than our default
threshold of 0.75, meaning we can never switch up.
By subtracting one chunk duration from the available duration, we make
this comparison fair again and allow all live streams (regardless of
live offset) to reach up to 100% buffered data (which is above our
default value of 75%), so that they can increase the quality.
Issue: google/ExoPlayer#9784
PiperOrigin-RevId: 416791033
*** Original commit ***
Rollback of 3c4c1f4774
*** Original commit ***
Add capability flags for hardware and decoder support
Issue: google/ExoPlayer#9565
***
***
PiperOrigin-RevId: 416285603
*** Original commit ***
Make audio track min buffer size configurable.
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
***
PiperOrigin-RevId: 415469179
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 415268938
`DefaultAudioSink` already has 3 telescoping
constructors and an other one would be have been
needed to add a buffer size tuning option.
PiperOrigin-RevId: 414703366
Allowing duplicate groups caused some other code working with the
array to use reference equality comparison. This is error-prone,
easily forgotten (e.g. when using the TrackGroups in a map) and
causes bugs when TrackGroups are serialized to disk or to another
process.
All TrackGroups created by ExoPlayer are already unique and custom
code creating TrackGroupArrays with identical groups can easily
distringuish them by adding an id to each group.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413617005
And also tweak existing role flag logic to strictly prefer perfect
matches over partial matches.
Caveat: Video role flags only supported for fixed track selections
(same issue as Issue: google/ExoPlayer#9519).
Issue: google/ExoPlayer#9402
PiperOrigin-RevId: 412292835
Currently, DrmSessionManager takes player specific values (= the
playback looper) through (pre)acquireSession calls and requires
the caller to pass in the same values every time.
Instead, we can configure the DrmSessionManager for playback with
a player once before it's being used. We can't simply extend the
prepare() method as prepare may be called before the player is
created to prewarm the DrmSessionManager.
The new method also takes a PlayerId which is bound to the lifetime
of the player similar to the playback looper.
To avoid breakage of custom MediaSources with DRM, we can keep the
old the SampleQueue.createWithDrm method as deprecated.
PiperOrigin-RevId: 410998240
Currently, TrackSelectionOverrides are documented as being applied
per track type, meaning that one override for a type disables all
other selections for the same track type. However, the actual
implementation only applies it per track group, relying on the
track selector to never select another renderer of the same type.
This change fixes DefaultTrackSelector to fully adhere to the
TrackSelectionsOverride definition. This solves problems when
overriding tracks for extension renderers (see Issue: google/ExoPlayer#9675)
and also simplifies a workaround added to StyledPlayerView.
#minor-release
PiperOrigin-RevId: 409121711
The asynchronous MediaCodec adapter queues input buffers in a
background thread. If a codec queueuing operation throws an exception,
the buffer enqueuer will store it as a pending exception and re-throw it
the next time the adapter will attempt to queue another input buffer.
The buffer enqueuer's flush() and shutdown() may throw an exception if
the pending error is set. This is subject to a race-condition in which
the pending error can be set while the adapter is flushing/shutting down
the enqueuer, e.g., if an input buffer is still being queued and the
codec throws an exception. As a result, the adapter cannot flush or
shutdown gracefully.
This change makes the buffer enqueuer to ignore any pending error
when flushing/shuttinf down so that the adapter can flush/release
gracefully even if a queueing error was detected.
PiperOrigin-RevId: 409113054
MediaSource can be reused with other Player instances after they
have been released, so we need to set the PlayerId when preparing
the source. Access can mostly be handled by the implementation in
BaseMediaSource.
PiperOrigin-RevId: 408878824
