This change makes sure that the `AdPlaybackState` of any period can
contain an empty postroll placeholder.
The placeholder postroll should be represented in the `MediaPeriodId`
of a content period as `nextAdGroupIndex`, but should be ignored when
building the list of `MediaPeriodInfo` in the `MediaPeriodQueue`. This
is required to allow to add an ad group to ad playback state of the
content period that is currently being played, instantly insert an ad
period into the media period queue and immediately transition playback
to the new period.
This change makes sure and tests that
- a live server side inserted postroll placeholder can be inserted to
a `AdPlaybackState` in well-defined and tested way (helper method)
- a postroll placeholder is NOT ignored when
`AdPlaybackState.getAdGroupIndexAfterPositionUs` is called (this
is required when evaluating the `nextAdGroupIndex`).
- a postroll placeholder is ignored when
`AdPlaybackState.getAdGroupIndexForPositionUs` is called (this is
required to not attempt to play the ad and is analogous to ignore the
post roll placeholder in a single period timeline).
- `MediaPeriod.getFollowingMediaPeriodInfo()` does not include a
`MediaPeriodInfo` for the placeholder postroll when building the
queue.
PiperOrigin-RevId: 515079136
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
Initialising the fields as Integer and then getting a String on compute time is slow. Instead we directly initialise these fields as String. Improves the time taken in bundling PlayerInfo further to less than 200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
This adds the full Builders and State representation needed to
implement all Player getter methods and listener invocations.
PiperOrigin-RevId: 489503319
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
* Rename (via deprecation)
`MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
with existing 'force' method names both in this class and in
`TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
`MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
is already present on the `MediaItem.SubtitleConfiguration#mimeType`
field that this setter corresponds to.
PiperOrigin-RevId: 450941336
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
This is an individual language (ISO 639-3) part of the Arabic
macrolanguage ("ar" in ISO 639-1). Add this mapping to our
existing list similar to other individual to macrolanguage
mappings we have already.
Issue: Issue: google/ExoPlayer#10255
PiperOrigin-RevId: 448911950
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
This method was introduced in 754eb1527a
as a replacement for Util.inferContentType(String) but it incorrectly
didn't return TYPE_SS when passed "ism" or "isml".
PiperOrigin-RevId: 445217167
This fixes some small niggles:
1. `inferContentType(String)` is documented to take a path, but in the
tests we're passing full URIs.
2. A `String` parameter is usually a path, but also a MIME type or an
extension. In the new methods, the meaning of a `String` parameter
is always clear from the name of the method.
3. `inferContentType(String)` is always passed an extension in
'production' code (which has to be manually prefixed with a dot).
4. `inferContentType(Uri, @Nullable String)` always ignores the Uri if
the String is non-null. IMO this logic is clearer to a reader if it's
just in-lined at the call-site.
These methods are used from the demo apps, so will be part of the stable
API.
PiperOrigin-RevId: 444826053
