It may be confusing for 3P apps, for us to have separate error codes for (1) if
encoding HDR is not supported at all by the device, and (2) if encoding the
format, which happens to be HDR, is not supported by the device. Instead, we can
communicate this in the error message.
PiperOrigin-RevId: 509188666
Tests in `SilenceSkippingAudioProcessorTest` used half as many short integers as needed for channel values when generating alternating silence/noise input. Fix this by passing left and right channel input.
PiperOrigin-RevId: 509188074
Following changes are included:
1. Added missing color information in HDR test case.
2. Corrected few namings in AudioBoxesTest.java.
3. Updated corresponding dump files.
PiperOrigin-RevId: 508745206
GLEffectsFrameProcessor, MatrixShaderProgram and FinalMatrixShaderProgramWrapper are currently setup to handle the input frames coming from an external input (i.e. a video decoder). Image input is loaded into Bitmap objects at the start of the pipeline, so they are not produced externally. The changes provide a way for the frame processing pipeline to handle this "internal" (i.e. non-external) input.
PiperOrigin-RevId: 508645244
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
The existing implementation depends on an internal library (Mp4Slicer) to assert the output. We have removed the dependency on internal library and used golden data to compare the output.
PiperOrigin-RevId: 508401527
- For single-asset, the behavior stays the same. Transcode if and only
if it's necessary,
- For constrained multi-asset, always transcode, except if the setter to
transmux is set. This is to avoid failing if a MediaItem that doesn't
require transcoding is followed by a MediaItem that does require
transcoding.
PiperOrigin-RevId: 508097798
Previously, Robolectric's instrumentation updated all constructors to be
public. This caused two main types of problems:
1) When non-public constructors were made public and added to the Android API,
Robolectric allowed tests to incorrectly use the constructors on older SDK
levels (where they were non-public). This most commonly occurs for
AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible.
Fix issues across Google3 Robolectric tests that were affected by this issue.
A forthcoming change will fix the instrumentation in Robolectric to prevent
this type of issue from occurring.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:507861075:BASE:507805409:1675803313108:f2128fa4
PiperOrigin-RevId: 508087822
If a renderer error happens while processing readahead data for the
next item in the playlist, we currently throw the error immediately
and only set the item id in the error details. This makes it harder
to associate the error to the right item. For example, the user
facing UI is likely not updated to show the failing item when the
error is reported.
This can be improved slighly by force setting the position to the
failing item. The playback still fails immediately, but this can't
be avoided because the renderer itself went into an error state.
PiperOrigin-RevId: 507808635
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
This is a refactoring to separate and simplify the logic
of VOD and live streams when handling IMA ad events. An
additional listener will be required for DASH live stream
in a follow-up CL.
PiperOrigin-RevId: 507435741
It doesn't actually make sense for them to be placed in the Transformer, because the error's root causes are actually only in codecs. Also, a few codec errors were
repeated, so deduplicate these instances
PiperOrigin-RevId: 506937695
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
* Overload added `(cause, errorCode, isVideo, isDecoder, details)`,
where `details` is a string of values to be added to the error message
of the `TransformationException`.
* Overload with `MediaFormat` and `mediaCodecName` moved to
`DefaultCodec`, because all usages of that overload were from
`DefaultCodec`, and this allows a simplified API because of internally
stored values.
* `mediaCodecName` removed from overload that takes a `Format`.
* Reordered `createForCodec` parameters.
PiperOrigin-RevId: 506895268
In encoding small and odd-numbered resolutions, like `316x61` ([this image](https://upload.wikimedia.org/wikipedia/commons/6/65/100winners.png)), the current fallback logic prefers a software encoder to hardware ones. The assumption was, the encoder factory applies the encoder size alignment and changes the resolution to `316x60` for SW encoders and `316x64` for HW ones. SW encoders is selected because the supported resolution 60 is closer to requested 61, than the hardware supported 64.
This change changes the default encoder selection process to only expose hardware encoders if there is any.
PiperOrigin-RevId: 506879983
With multi-asset, the sample pipelines can process more than one
MediaItem. The renaming makes it clear that the format passed to the
SamplePipeline constructors is the one corresponding to the first
MediaItem. Indeed, the first format is the one used to configure the
SamplePipelines.
PiperOrigin-RevId: 506879260
Set the correct output color on the debug SurfaceViewWrapper, so that SDR contents
can have an output transfer of either GAMMA_2_2 (Gamma 2.2) or SDR (SMPTE 170M).
This fixes an issue where in-app tone-mapping would output gamma 2.2, and the
SDR value incorrectly hardcoded here would lead to an error in the OpenGL, which
does not support SMPTE 170M.
PiperOrigin-RevId: 506684602
This change includes 3 things:
- when the legacy media session is created, FLAG_HANDLES_QUEUE_COMMANDS
is advertised if the player has the COMMAND_CHANGE_MEDIA_ITEMS
available.
- when the player changes its available commands, a new
PlaybackStateCompat is sent to the remote media controller to
advertise the updated PlyabackStateCompat actions.
- when the player changes its available commands, the legacy media
session flags are sent accoridingly: FLAG_HANDLES_QUEUE_COMMANDS is
set only if the COMMAND_CHANGE_MEDIA_ITEMS is available.
#minor-release
PiperOrigin-RevId: 506605905
(cherry picked from commit ebe7ece1eb7e2106bc9fff02db2666410d3e0aa8)
