This change adds an API in the ForwardingPlayer to disable commands.
This is affecting what Player.isCommandAvailable() returns as
well as what is being advertised from the
EventListener.onAvailableCommandsChanged() callback.
For the callback case, the ForwardingPlayer needs to intercept the
callback. It does so by wrapping registered EventListener and Listener
instances, which resulted in some boiler-plate code. In addition, there
is logic on the wrapped listeners to avoid triggering a queued callback
if all listeners have been removed in the meantime. This includes the
case where new listeners are added while callbacks scheduled for the
removed listeners are still pending.
PiperOrigin-RevId: 371139703
Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Session pre-fetching caused this ordering assertion to no longer be
always true. It should have been removed in
795ddfee40
#minor-release
PiperOrigin-RevId: 370880530
Rating class should be in the same module as MediaMetadata.
Tested:
$ ./gradlew --stacktrace :exo-library-common:tDUT
$ ./gradlew --stacktrace :media2-session:tDUT
$ ./gradlew --stacktrace :media2-session-vct-current:cAT
PiperOrigin-RevId: 370902917
Session pre-fetching caused this ordering assertion to no longer be
always true. It should have been removed in
795ddfee40
#minor-release
PiperOrigin-RevId: 370880530
1. Clarify intention of getAdGroupIndexForPositionUs and
getAdGroupIndexAfterPositionUs. Both methods are used for very
specific but different purposes and encode the logic of which
ads should be played at which time, so it's helpful to clarify
this in the documentation as well.
2. Change one usage getAdGroupIndexForPositionUs to use the already
existing nextAdGroupIndex. This is also more in line with the
intended usage as clarified in step 1.
3. Update MediaPeriodQueueTest for updateQueuedPeriods to only
look for duration changes in future periods, not in the
current one, because that's not handled MediaPeriodQueue for ads
and the test is just passing by chance now. Also remove wrong
advancePlaying() calls that are already implicitly included in
the preceding enqueueNext() call.
4. Fix a minor bug where post-roll ads are not checked whether they
are played already before using them as the next ad group. Also
added a test covering this case.
#minor-release
PiperOrigin-RevId: 370664131
Previously loadingFinished will never be set to true because it started in
false, and we are and'ing it with `canceled`.
#minor-release
PiperOrigin-RevId: 370662456
The ForwardingPlayer implements the Player interface and forwards all
operations to another Player instance. Apps will be able to override
methods of ForwardinPlayer in order to modify and/or suppress specific
Player funcionalities.
This commit introduces the ForwardingPlayer which simply forwards all
Player operations to another Player instance. In follow-up changes,
the ForwardingPlayer will be extended so that it eventually reaches the
feature-set offered by ControlDispatcher.
PiperOrigin-RevId: 370653167
Release is a life cycle operation that should only be called when
the player is no longer needed. It's linked to the player lifecycle
and thus very different from prepare/stop.
As a result, it should not be in the same command.
Additionally it's not clear if remote players will ever need to call release,
as the player creator is best candidate to release it.
As a result the release operation doesn't have a use case for a command.
A release command can be added later if a need is identified.
PiperOrigin-RevId: 370649214
We remove other source related listeners if a MediaSource is
removed from the playlist or the player/source is released.
This isn't currently done for the DRM listener.
#minor-release
PiperOrigin-RevId: 370482571
The DebugMediaCodecVideoRenderer expects the MediaCodec to return an
output format change after the MediaCodecRenderer detects an input
format change, but the DebugMediaCodecVideoRenderer resets its state
after flushing MediaCodec. This does not cover the following case: an
input format change is detected when queueing sample with timestamp X
and before the respective output buffer is dequeued, the player seeks
back to X. After seeking back to X, the MCR does not trigger an input
format change for X again, and MediaCodec (correctly) returns an output
format change before dequeueing output X.
This commit is changing DebugMediaCodecVideoRenderer to keep expecting
an output format change after a flush, is one a format pending output.
Such an an edge-case is addressed already in MediaCodecRenderer.
PiperOrigin-RevId: 370482506
MediaCodecRenderer is calling its protected methods
resetCodecStateForRelease() and resetCodecStateForFlush() from its
constructor. Classess that override the methods (eg.
DebugMediaCodecVideoRenderer) need to checks if the methods
are called from the superclass constructor thus their members are not
initialized yet.
With this change, the MCR constructor does not call the two
methods and sets the respective state directly on its fields.
PiperOrigin-RevId: 370445978
There is a bug when CronetDataSource opens an asset with a length
bigger that Integer.MAX_INT (2147483647 bytes, ~2GB). In read(),
`bytesRemaining` is cast to int, which overflows and evaluates to a
negative number, causing `bytesRead` to be negative too.
PiperOrigin-RevId: 370434368
After refactoring MediaCodecRenderer's configureCodec() to
getMediaCodecConfiguration(), there was some state initialization left
in DebugMediaCodecVideoRenderer's configureCodec(). This is now moved
inside DebugMediaCodecVideoRenderer.onCodecInitialized().
PiperOrigin-RevId: 370430193
Remove references to deprecated methods. I didn't replace the DRM info
with references to non-deprecated methods because I'm not sure it
belongs at class level. The methods themselves are already documented
in detail.
PiperOrigin-RevId: 370421087
* @Nullable is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs.
(see go/java-style#s4.8.5-annotations)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Suggest a fix on the CL (go/how-to-suggest-fix).
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if the change looks generally problematic.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/exoplayer/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
PiperOrigin-RevId: 370377751
Add method getAvailableCommands() in Player interface to return
the available commands. Method isCommandAvailable() moved to
BasePlayer since it can be implelented by calling
getAvailableCommands().
PiperOrigin-RevId: 370059328
* @Encoding is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs.
(see go/java-style#s4.8.5-annotations) (2 times)
* @Nullable is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs.
(see go/java-style#s4.8.5-annotations) (2 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Suggest a fix on the CL (go/how-to-suggest-fix).
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if the change looks generally problematic.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/exoplayer/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
PiperOrigin-RevId: 370048160
