The result is plumbed back to `MediaCodecRenderer` via a new
`DrmSession#requiresSecureDecoder` method.
This allows us to use the `MediaDrm#requiresSecureDecoder` method added
in Android 12:
https://developer.android.com/reference/android/media/MediaDrm#requiresSecureDecoder(java.lang.String)
This change also removes
`FrameworkMediaCrypto#forceAllowInsecureDecoderComponents`, replacing it
with equivalent logic in `FrameworkMediaDrm#requiresSecureDecoder`.
PiperOrigin-RevId: 389616038
The dokka javadoc generation tool complains when parameter names don't match between a method and its override. This change updates occurrences where there is currently a mismatch.
Notable renamings that might be controversial:
- `onPlaybackStateChanged(int state)` to `onPlaybackStateChanged(int playbackState)` affected a lot of lines but seems more consistent with other '-Changed' methods.
- `handleMessage(int messageType, Object payload)` to `handleMessage(int messageType, Object message)`
- `ExtractorInput` and `DataSource` inherit `DataReader` which had `read(byte[] target, ...`, while data sources normally called the first parameter `buffer`. I have standardized these all to use `buffer` even though it looks out of place in the `ExtractorInput` interface (which has more `read` methods with `target`).
PiperOrigin-RevId: 387290360
The types (open/close/read) does not provide extra information about the thrown
playback exception, and they are not utilized at higher levels.
PiperOrigin-RevId: 384219870
- Use `PlaybackException.ErrorCode` IntDef for `DataSourceException` error code
- Deprecate `DataSourceException.POSITION_OUT_OF_RANGE`
- All other changes are related to replacing the deprecated constant and
constructor
PiperOrigin-RevId: 382683522
A no-op change that changes the signature of the onChunkLoadError method of the ChunkSource. Implementors can get the exclusion duration directly from the LoadErrorHndlingPolicy instead of receiving it as an argument of the callback.
PiperOrigin-RevId: 381102935
This softens the language around suppressing individual test methods.
There are some legitimate cases where this is needed, e.g.
ByteArrayDataSourceContractTest has to suppress all the tests related
to non-existent resources because it's not possible to simulate that
case.
#minor-release
PiperOrigin-RevId: 380570017
* Constructors and methods with the same name should appear sequentially with no other code in between, even when modifiers such as static or private differ between the methods. Please re-order or re-name methods.
(see http://go/bugpattern/UngroupedOverloads) (2 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Suggest a fix on the CL (go/how-to-suggest-fix).
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if the change looks generally problematic.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
PiperOrigin-RevId: 380544425
Also change to explicitly track the provisioning session, which makes
the code easier to reason about than always using the zero'th element
of the list.
PiperOrigin-RevId: 380181453
Add the `needsReconfiguration` API on the `MediaCodecAdapter` interface so that `MediaCodecRenderer` can reconfigure the `MediaCodec` in case a `MediaCodecAdapter` needs to be reconfigured immediately after being obtained from the `MediaCodecAdapter.Factory`.
PiperOrigin-RevId: 376944334
This change introduces a third 'state' for `DefaultDrmSessionManager`:
It's been fully released (prepareCount == 0) but at least one of its
sessions is still active.
In this state new acquisitions are rejected (`(pre)acquireSession()`
calls will fail) but the machinery to support the existing sessions
(ExoMediaDrm and MediaDrmHandler) is kept until they're all released.
This change will allow us to remove the TODO in MediaCodecRenderer
that resolves Issue: #8842.
PiperOrigin-RevId: 376193952
In a follow-up change I will add an additional test to ensure these
events continue to be correctly handled when DefaultDrmSessionManager
has prepareCount==0 but a non-null ExoMediaDrm instance.
PiperOrigin-RevId: 376190225
Also make future similar issues less likely by adding isPlaceholder
to the set method of Period (in case forwarding Timeline
implementations use this instead of just updating values selectively)
#minor-release
PiperOrigin-RevId: 372138523
Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Add method getAvailableCommands() in Player interface to return
the available commands. Method isCommandAvailable() moved to
BasePlayer since it can be implelented by calling
getAvailableCommands().
PiperOrigin-RevId: 370059328
A subsequent change will make the UI module access
SphericalGLSurfaceView and VideoDecoderGLSurfaceView
using reflection, now we're at the point where we only
need to reflect the constructors.
PiperOrigin-RevId: 369630102
The original cl has been fixed by not implementing
VideoListener but Player.Listener in
StyledPlayerView.
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 369417682
This change moves the responsibility of creating, configuring and starting the MediaCodec from the MediaCodecRender to the MediaCodecAdapter.Factory.
This move allows ExoPlayer's client to decide how and when codecs are created and/or reused.
To allow the move, this CL replaces MediaCodecRenderer.ConfigureCodec with MediaCodecRenderer.getCodecConfiguration
PiperOrigin-RevId: 369273887
*** Original commit ***
Move VideoComponent in ExoPlayer
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
***
PiperOrigin-RevId: 369194309
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 368863829
Previously, we had separate MSG_SET_SURFACE and
MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER messages for
setting different types of supported output. Use of these
constants to switch between outputs during use of a player
was confusing because not all video renderers support both
message types.
To switch from VideoDecoderOutputBufferRenderer to a Surface,
it was sufficient just to send MSG_SET_SURFACE, since all
video renderers support this and clear any other output that
might be set. Conversely, to switch in the opposite direction,
just sending a MSG_SET_VIDEO_DECODER_OUTPUT_BUFFER_RENDERER was
not sufficient, because not all video renderers handle this
message to clear any previous output. Hence it was necessary to
explicitly clear a previously set surface using a separate
MSG_SET_SURFACE message. Passing two messages to switch the
output may prevent renderers from implementing the output switch
efficiently.
This change passes all outputs using a single message type, and
requires that all renderers treat unsupported outputs as though
null were passed (i.e., they clear any existing output). There
are some other miscellaneous improvements:
1. Non-surface outputs are now passed to onRenderedFirstFrame.
This fixes a bug in SimpleExoPlayer's onRenderedFirstFrame,
where previously it could not correctly equality check the
output corresponding to the event to its current output in
the VideoDecoderOutputBufferRenderer case.
2. Fix SimpleExoPlayer to report surface size changes for the
VideoDecoderOutputBufferRenderer case. Even though the
surface is rendered to indirectly in this case, we can still
query (and listen to changes to) the surface's size.
PiperOrigin-RevId: 368215850
Prior to this change, there were some unrealistic quirks in
our Robolectric tests. For example, onRenderedFirstFrame would
be called when using FakeVideoRenderer, despite no output to
render the frame to ever being set. This change improves the
realism of these tests. These changes are required for some
improvements being made to how outputs are set on video
renderers.
PiperOrigin-RevId: 367652169
We added a source that allows mixed placeholder and non-placeholder
periods, but have no way to denote that in the Timeline because the
placeholder flag only exists on Window level. This causes a bug if
the first item in a concatenation has a window-period offset and the
player can't detect whether it's still a placeholder or not.
Adding this flag to Period allows the player to detect this reliably.
In addition we need to make sure that re-resolving pending positions
only happens for the first placeholder period where the window-offset
can actually change. As all subsequent periods have to start at position
0, so they don't need to be re-resolved (and shouldn't).
PiperOrigin-RevId: 367171518
