Adds root extras and metadata extras to MockMediaLibraryService and MockMediaBrowserCompatService and completed test cases for asserting
interoperability with a media1 or Media3 browser.
PiperOrigin-RevId: 480854842
(cherry picked from commit f95406e75d1eca9b96477132d33d752e2485bee6)
- This method is redundant with getSupportedSampleMimeTypes().
- This is to prepare the Muxer class to become public.
PiperOrigin-RevId: 480840902
(cherry picked from commit 8962f5a3f4b505224ceb22ac5771b85f24e30358)
When debugging and fixing Issue: google/ExoPlayer#10666 I wanted to write a regression
test, but needed to add a test first... This is just a small bit of
coverage to start with. It checks the field/channel filtering works
correctly, but doesn't check any styling info. It also doesn't test
'pop on' subtitles (i.e. when the subtitle isn't shown until a 'end of
subtitle' signal is received).
PiperOrigin-RevId: 480644568
(cherry picked from commit 6052212c15b89d71846f1f3855728ce863304bca)
Most demo videos aren't very long, and the default demo video is only 10 seconds.
Shorten the maximum trim duration to 10 seconds, to demonstrate transformer functionality more easily, and allow this to be used more easily when trimming short sections of a longer video (ex. to make test clips)
PiperOrigin-RevId: 480602037
(cherry picked from commit 3142a2127dc224e4c2124989b952a8bd1e06d510)
Player controls are somewhat distracting when showing the difference between the
input and output video, as they obscure and darken the video players.
PiperOrigin-RevId: 480597804
(cherry picked from commit 91a61cecbe37f4c5595f534ee237011289c0ac18)
Before, slider values were read as `floor()`'ed `longValue()`s, so that trimming to
intervals less than one second would be interpreted as a request for a zero-
duration trim.
Also, rename `radiusRange` references here to `trimRange`, since this is not a
radius range.
PiperOrigin-RevId: 480401556
(cherry picked from commit 6c59f9ece40f6450405d29acd559492145158409)
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
(cherry picked from commit af19e0ea890e7b274b6f75f409f00f11e11c1c81)
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
(cherry picked from commit a366590a0425ff138520752e2fc94c70429c20ab)
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
(cherry picked from commit 2188685c465aa6d641e78ab33eaa93fbb92185b8)
Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit faa796d7365330d1f1d4f5b17901d6b1a78ce868)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit ccab9fba0369ea9709a6987024177e8b73a5c7ac)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 4c73241058041fd978e9748b2158168d4e6e702d)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit 088958994776a65666045b3e7b332f5f0c336bcf)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit ff8dd0b4b9aa498a831c9721c530e77bf099a4ed)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 36e41059ea9e98aeab105375a683f7cd7481c5a8)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
(cherry picked from commit 7286155fc327b1ffcd72903a739368b4bdeebcf8)
Per go/java-practices/imports#static
No functional changes intended.
PiperOrigin-RevId: 477974779
(cherry picked from commit da2c6376cd86b7b8e9fd450cd61ed8fbc3a739dd)
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
(cherry picked from commit 97868025275e5fb6dd62e8407a7384ff44e204f6)
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
(cherry picked from commit ccb820dd2f43ff20dff06a92a4e29c13676e647d)
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
(cherry picked from commit f745c6ee0ea0b610cfdf6a146818b0da7d06326a)
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
(cherry picked from commit 94a88e93d91e86c93239639a65612eab297efa9b)
* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.
PiperOrigin-RevId: 476124592
(cherry picked from commit afd829e5db17c48abccea30842eec20b702aa330)
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
(cherry picked from commit 331d4d626fcb1b65088c7ab849c0a0a3f5f6ba0e)
Tested:
* Manually using both path and file descriptor.
PiperOrigin-RevId: 475860978
(cherry picked from commit 08bb01b218461506352ae4c2f17efd27989553e5)
* The command changed after creating a custom effects module.
PiperOrigin-RevId: 474777823
(cherry picked from commit fd6b0d1551af6db9de49dd17c30937a4b292357d)
Currently doSomeWork is never closed and so tracing is deceiving.
See https://screenshot.googleplex.com/eZDzn5APpBNnhe5
PiperOrigin-RevId: 474755816
(cherry picked from commit 005b73c82a1a3264a7167ffdf93a9387c4d22b95)
