These callbacks are executed on the app thread after the corresponding
timeline update was triggered. This ensures that seek operations see the
updated timelines and are therefore valid, even if the seek is performed into a
window which didn't exist before.
GitHub:#3407
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175136187
This also allows exposing multiple CC channels to any fMP4 extractor client.
Issue:#1661
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174458725
Client can add this functionality by extending DownloadService.
Also made DownloadManager accept multiple listeners. So instead of
broadcast event, client can listen to DownloadManager directly.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174335820
Instead of using an Executor to run DownloadTasks creates and manages
threads internally.
Also added DownloadThread internal class to better separate the code
that doesn't run on the main thread.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174036872
1. Move Timeline/Manifest into PlaybackInfo
2. Don't update externally visible Timeline/Manifest during preparation
3. Ignore MSG_POSITION_DISCONTINUITY during preparation
4. Correctly set masking variables at start of preparation, and use them
Once this change goes in, PlaybackInfo will contain timeline, manifest
and position, which should always be self-consistent with one another.
The next step would then be to move a bunch of logic in ExoPlayerImpl
that derives state from timeline and position into PlaybackInfo, and
split that into its own top level class that can be easily tested to make
sure it never IndexOutOfBounds.
I think we could also replace the masking variables and instead just assign
a new PlaybackInfo to the playbackInfo variable whenever we're doing
something that requires masking. This should be possible because we no
longer update playbackInfo whenever we have pending acks. It would
require allowing PlaybackInfo to mask the window position internally when
the timeline is empty, but I think this is ok, and again is something we
could test pretty easily.
Issue: #3362
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=173909791
Tasks conflict if both of them work on the same media and at least one
of them is remove action.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=172741795
newPlayingPeriodHolder could be set then updated if seeking to a repeated period
that was loaded more than once. This led to MediaPeriodHolders leaking.
Only set newPlayingPeriodHolder once so that any later holders with the same
period identifier get released.
Also add a regression test. FakeMediaSource checks that all created
MediaPeriods were released when it is released.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=172591937
This is useful to determine when a seek request was processed by the player
and all playback state changes (mostly to BUFFERING) have been performed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=170826793
Remaining instrumentation tests either use android.os.Handler or rely on assets.
In the latter case, the tests are difficult to migrate due to differences
between the internal and external build systems, and configuration needed in
Android Studio. In addition, SimpleCacheSpanTest remains as an instrumentation
test because it fails due to a problem with string encoding on the internal
build (and two other tests in its package are kept with it because they depend
on it).
This test removes a dependency from testutils on Mockito, as a different
version of Mockito needs to be used for instrumentation tests vs Robolectric
tests, yet both sets of tests need to rely on testutils. Mockito setup is now
done directly in the tests that need it.
Move OggTestData to testutils so it can be used from both instrumentation and
Robolectric tests.
It may be possible to simplify assertions further using Truth but this is left
for possible later changes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=167831435
The bytesRemaining didn't always take into account any skipped bytes, which
meant that reaching the end of the file was not correctly detected in read().
Issue: #3216
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=167016672
Both cases were not supported so far. Added tests which all failed in the
previous code version and adapted the concatenated media sources to cope with
empty timelines and empty concatenations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166480344
This is mostly connecting the already stored shuffleMode with the timeline queries
for the playback order.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166199330
The media source is initialized with a DefaultShuffleOrder which can be changed at
any time. Whenever the list of media source is changed, the shuffle order is adapted
accordingly (either on the app thread if the player is not prepared yet, or on the
player thread). The shuffle order is then used to construct the timeline.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166198488
The media source is initialized with a DefaultShuffleOrder which can be changed at
any time. This shuffle order is then used within the corresponding timeline.
The isRepeatOneAtomic flag is extended to also suppress shuffling (now called
isAtomic only).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166197184
In addition, let unit test assert window indices for both shuffle modes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166191069
This functionality is most likely needed by UI modules which currently need
to obtain the timeline, the current repeat and shuffle modes and are only then
able to query the next/previous window index using this information.
Adding these methods simplifies these cumbersome requests.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166181202
This allows to test the expected behaviour of timeline with different shuffle modes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166181091
And implement a basic version of the methods in all implementations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=166041342
These classes maintain a shuffled order of indices allowing to query the
next, previous, first, and last indices. And also support inserting and
removing elements without changing the shuffled order of the rest.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=164116287
- Fix Ogg extractor to work without sniffing.
- Fix extractors to handle seek() before init().
- Add tests for both issues.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=163992343
This is for consistency with what we do elsewhere;
specifically in FragmentedMp4Extractor.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=163974960
Currently the ExoPlayerWrapper is used to run tests using an ExoPlayer
implementation. Some properties of the test are set in the constructor, some
are set by overloading the class, others are hard-coded in the
ExoPlayerWrapper class, and a mechanism similar to the existing ActionSchedule
is missing.
This change does the following:
1. Renames ExoPlayerWrapper to ExoPlayerTestRunner as it better reflects
its purpose.
2. Adds an internal Builder to easily set-up the test in a coherent way. This
allows to only set necessary test components while using defaults for the rest.
3. Integrate ActionSchedule.
4. Apply the new structure to the existing tests currently using ExoPlayerWrapper.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=163186578
This is the first step towards facilitating Cast integration to ExoPlayer.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162366198
This enables adaptive media test cases using TrackGroups with multiple
Formats.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=162182005
